Abstract:Perovskite light-emitting devices (PeLEDs) have drawn a great deal of attention because of their exceptional optical and electrical properties. However, as for the blue PeLEDs based on low-dimensional (LD) CsPbBr3, the low conductivity of the widely used organic spacers as well as the difficulty of forming pure and uniform LD CsPbBr3 phase have severely inhibited the device performance such as stability and efficiency. In this work, we report an effective strategy to obtain high-quality LD CsPbBr3 by using a novel spacer of inorganic Cs4PbBr6 instead of the common long-chain ammonium halides. We found that a 3-amino-1-propanol (3AP)-modified PEDOT:PSS was helpful to stimulate the formation of the LD blue emissive CsPbBr3:Cs4PbBr6 composite. We also revealed that an additive of poly(vinylpyrrolidone) (PVP) in the precursor can limit further growth of LD perovskite phase into 3D perovskite phase upon annealing, thus resulting in a uniformly distributed LD perovskite with high color stability. Consequently, efficient blue PeLEDs @ 485 nm with a brightness of 2192 cd/m2, current efficiency of 2.68 cd/A, and external quantum efficiency of 2.3% was successfully achieved. More importantly, the device showed much improved working stability compared to those with the spacer of organic ammonium halides. Our results provide some helpful insights into developing efficient and stable blue PeLEDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02555?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02555</a>.Video S1 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02555/suppl_file/am1c02555_si_001.avi">AVI</a>)Transient absorption, PL, and EL curves; 3D AFM images; peak centers versus temperature; device structure and EL performance of the PeLED (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02555/suppl_file/am1c02555_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

Effect of small molecule additive on efficient operation of all inorganic polycrystalline perovskite light-emitting diodes

Multifunctional Additives for Bright, Efficient and Stable Lead-bromide Perovskite LEDs

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

Enhanced performance of all solution-processed perovskite light-emitting diodes using phenylpropylammonium bromide-additive assistant strategy

Perovskite-molecule Composite Thin Films for Efficient and Stable Light-Emitting Diodes.

Morphology and Luminescence Regulation for CsPbBr3 Perovskite Light-Emitting Diodes by Controlling Growth of Low-Dimensional Phases.

Bright and Efficient Perovskite Light Emitting Electrochemical Cells Leveraging Ionic Additives

Efficient and Stable Blue Perovskite Light-Emitting Devices Based on Inorganic Cs 4 PbBr 6 Spaced Low-Dimensional CsPbBr 3 through Synergistic Control of Amino Alcohols and Polymer Additives

Enhancing the performance of perovskite light-emitting diodes via the insertion of NaCl

Enhanced Performance of Perovskite Light-Emitting Devices with Improved Perovskite Crystallization

Efficient CsPbBr 3 sky-blue perovskite light-emitting devices Co-regulated by dual polymer additives

Efficient Inorganic Perovskite Light-Emitting Diodes by Inducing Grain Arrangement via a Multifunctional Interface

Interfacial Energy-Level Alignment for High-Performance All-Inorganic Perovskite CsPbBr 3 Quantum Dot-Based Inverted Light-Emitting Diodes.

Optimization of the carrier recombination and transmission properties in perovskite LEDs by doping poly (4-vinylpyridine) and graphene quantum dots made of chitin

Rapid Crystallization of All-Inorganic CsPbBr3 Perovskite for High-Brightness Light-Emitting Diodes

Inhibiting Cation Segregation to Enable Highly Efficient Perovskite Light‐Emitting Diodes

Improved Performance of Pure Red Perovskite Light-Emitting Devices Based on CsPb(Br1-xIx)3 with Variable Content of Iodine and Bromine.

Enhanced Efficiency and Stability of Sky Blue Perovskite Light-Emitting Diodes via Introducing Lead Acetate

Critical role of additive-induced molecular interaction on the operational stability of perovskite light-emitting diodes

Giant efficiency and color purity enhancement in multicolor inorganic perovskite light-emitting diodes via heating-assisted vacuum deposition

A Mixed Organic-Inorganic Interlayer With Tunable Electrical Properties Enabling Stable and Efficient Perovskite Light-Emitting Diodes