Abstract:Solution-processed organometal halide perovskites (formulated as ABX3,where A is the methylammonium (CH3NH3+)(MA) or metal cesium cation (Cs+),B is the lead cation (Pb2+) and X is the halide anion (Br-,I-,Cl-)) are promising candidates for next generation light-emitting materials owing to their unique optoelectronic properties.These properties mainly include extremely high photoluminescence quantum yield (PLQY),easily tunable band gap and narrow emission characteristics.During the past two years,impressive progresses have been made in perovskite light-emitting diodes (PeLED) with hybrid organic-inorganic perovskite materials (i.e.,CH3NH3PbBr3).So far,the best external quantum efficiency (EQE) of CH3NH3PbBr3-based PeLED was reaching up to ～8.53％ which was close to the results of organic light-emitting diodes (OLED).Despite the remarkable performance of the devices demonstrated,the stability of organic-inorganic hybrid perovskites remains a major concern.To circumvent this problem,all-inorganic halide perovskites exhibiting higher thermal and chemical stability,such as cesium lead bromide (CsPbBr3),have been used as alternative emitters in PeLED.Despite the advantages described above,both the brightness and the EQE of CsPbBr3-based PeLED remain limited.One important reason for low efficiency of CsPbBr3-based PeLED is the facile dissociation of excitons in 3D perovskites due to their small exciton binding energy.One promising way to enhance the exciton binding energy is reducing the grain size of perovskites.Herein,we report a solution process to form highly uniform and ultra-fiat perovskite films with nanometre-sized grains that allow us to demonstrate efficient PeLED.By mixing long-chain ammonium halides of CH3CH2CH2NH3Br (PABr) with the 3D CsPbBr3 perovskite precursor solution,the growth of 3D perovskite grains are dramatically impeded and the PA2(CsPbBr3)n-1PbBr4 quantum dots with grain size of ～100 nm were achieved.This is because the long-chain ammonium ions cannot fill the comer of PbBr4 octahedral layers and therefore impedes the 3D perovskite formation.Moreover,the nanometre-sized grains feature reduced dimensionality,starting a transition from 3D to 2D layered (so-called Ruddlesden-Popper phase) perovskite structures.The SEM image show the morphology of PA2(CsPbBr3)n-1PbBr4 layer was dense and uniform,which is very important to suppress the leaking current in the PeLED.We found that PA2(CsPbBr3)n-1PbBr4 film mainly consists of two different 2D structures,namely PA2PbBr4 (n=l) and PA2(CsPbBr3)PbBr4 (n=2),according to the analysis of XRD pattern.Compared to the single UVs absorption peak of CsPbBr3 at ～520 nm,PA2(CsPbBr3)n-1PbBr4 film show multiple absorption peaks,indicating several extonic states are formed upon light excitation.Although several extonic states exist,photoluminescence (PL) with only one peak of 506 nm was observed in PA2(CsPbBr3)n-1PbBr4 film.We suspect that the energy transfer occurs from the excitons with larger bandgap to those with smaller bandgap,making recombination occurs only in the excitons with the smallest bandgap.For the PeLED with structure of ITO/PEDOT:PSS/PA2-(CsPbBr3)n-1PbBr4/TPBi/Cs2CO3/A1,the turn-on voltage is ～4.2 V,the maximum luminance is ～2370 cd/m2,the maximum current efficiency is ～1.06 cd/A,and maximum EQE is ～0.57％.Compared to the traditional method achieving blue PeLED by substituting halide anions,obvious improvements can be seem not only in the material processing and the perovskites film quality,but also in the PeLED's performance.Our studies may provide an alternative way to explore low-cost and high-efficiency blue PeLED.

Efficient and Stable Blue Perovskite Light-Emitting Devices Based on Inorganic Cs 4 PbBr 6 Spaced Low-Dimensional CsPbBr 3 through Synergistic Control of Amino Alcohols and Polymer Additives

Efficient CsPbBr 3 sky-blue perovskite light-emitting devices Co-regulated by dual polymer additives

Efficient CsPbBr3 Sky-Blue Perovskite Light-Emitting Devices Co-regulated by Dual Polymer Additives

Efficient sky-blue cesium lead bromide light-emitting diodes with enhanced stability via synergistic interfacial induction and polymer scaffold inhibition

High Performance and Stable All-Inorganic Perovskite Light Emitting Diodes by Reducing Luminescence Quenching at PEDOT:PSS/Perovskites Interface

Efficient CsPbBr3 Perovskite Light‐Emitting Diodes Enabled by Synergetic Morphology Control

Spectrally Stable Blue Light-Emitting Diodes Based on All-Inorganic Halide Perovskite Films

Efficient and Stable Blue Perovskite Light Emitting Diodes Based on Defect Passivation

Modulating low-dimensional domains of self-assembling quasi-2D perovskites for efficient and spectra-stable blue light-emitting diodes

Light-emitting Diodes Based on Two-Dimensional PA2(CsPbBr3)n-1PbBr4 Layered Perovskites

Efficient and Spectrally Stable Blue Perovskite Light‐Emitting Diodes Based on Potassium Passivated Nanocrystals

Bright and Color-Stable Blue-Light-Emitting Diodes Based on Three-Dimensional Perovskite Polycrystalline Films Via Morphology and Interface Engineering

Multi‐Functional Additive Strategy Enables Efficient Pure‐Blue Perovskite Light‐Emitting Diodes

Efficient and Stable Blue Perovskite Light-Emitting Diodes Through I-III-VI Quantum Dot Solids As Hole Transport Layer

Color-Stable Blue Light-Emitting Diodes Enabled by Effective Passivation of Mixed Halide Perovskites

Highly Efficient Sky-Blue Perovskite Light-Emitting Diode Via Suppressing Nonradiative Energy Loss

Strongly-Confined CsPbBr3 Perovskite Quantum Dots with Ultralow Trap Density and Narrow Size Distribution for Efficient Pure-Blue Light-Emitting Diodes

A Cocktail of Multiple Cations in Inorganic Halide Perovskite Toward Efficient and Highly Stable Blue Light-Emitting Diodes

Efficient Inorganic Perovskite Light-Emitting Diodes by Inducing Grain Arrangement via a Multifunctional Interface

High‐Efficiency and Emission‐Tunable Inorganic Blue Perovskite Light‐Emitting Diodes Based on Vacuum Deposition

A Multifunctional Additive Strategy Enables Efficient Pure-Blue Perovskite Light-Emitting Diodes