Abstract:Blue perovskite light-emitting diodes (PeLEDs) based on the quasi two-dimensional (quasi-2D) perovskites with chloride (Cl) and bromine (Br) ions have made significant progress in improving external quantum efficiencies (EQEs) during the past few years. However, the mixed-halide quasi-2D PeLEDs still suffer from the issues of serious efficiency roll-off and spectral instability. Here, the modification of mixed-Cl/Br quasi-2D perovskites with a multi-functional additive was proposed to achieve efficient blue PeLEDs with reduced efficiency roll-off and stable electroluminescence (EL) spectra. Aminophylline (AMP) with Lewis base characteristics was employed as the additive to incorporate with the CsPb(Cl/Br) 3 based quasi-2D perovskites. It was observed that the introduction of AMP additive suppressed the low dimensional phases in the quasi-2D blue perovskite film, leading to that carriers can be harvested for radiative recombination rather than be located at the low dimensional phases. In addition, the AMP additive, containing carbonyl and imine groups, can coordinate with the uncoordinated Pb 2+ , which enables the passivation of defects and the reduction of trap-assisted non-radiative recombination in the blue quasi-2D perovskite films. As a result, based on the AMP-modified quasi-2D perovskites, the champion PeLED achieved a maximum EQE of 13.2% with the stable EL peak at 484 nm, which is 1.6 times of the pristine device without AMP additive. Importantly, the AMP-modified blue PeLEDs remained the EQE of as high as 11.5% at the high luminance of 1000 cd m −2 , demonstrating a significantly reduced EQE roll-off. Meanwhile, the AMP-modified devices presented more stable spectra than the pristine devices under various voltages or continuous operation at an identical initial luminance. This study demonstrated a facile modification strategy by using a multi-functional additive to facilitate the improvement of efficiency roll-off and spectral stability in mixed-Cl/Br quasi-2D blue PeLEDs.

Enhanced performance of all solution-processed perovskite light-emitting diodes using phenylpropylammonium bromide-additive assistant strategy

Multifunctional Additives for Bright, Efficient and Stable Lead-bromide Perovskite LEDs

Tuning Precursor-Amine Interactions for Light-Emitting Lead Bromide Perovskites

Enhanced Performance of Perovskite Light-emitting Diodes via Phenylmethylamine Passivation

Effect of small molecule additive on efficient operation of all inorganic polycrystalline perovskite light-emitting diodes

Enhanced Efficiency and Stability of Sky Blue Perovskite Light-Emitting Diodes via Introducing Lead Acetate

High performance organo-lead halide perovskite light-emitting diodes via surface passivation of phenethylamine

Enhanced Performance of Perovskite Light-Emitting Devices with Improved Perovskite Crystallization

Optoelectronic Properties of MAPbBr3 Perovskite Light-Emitting Diodes Using Anti-Solvent and PEDOT:PSS/PVK Double-Layer Hole Transport Layers

Combined Optimization of Emission Layer Morphology and Hole-Transport Layer for Enhanced Performance of Perovskite Light-Emitting Diodes

Ionic-liquid Induced Enhanced Performance of Perovskite Light-Emitting Diodes

Efficient All‐Solution‐Processed Perovskite Light‐Emitting Diodes Enabled by Small‐Molecule Doped Electron Injection Layers

Efficient CsPbBr3 Sky-Blue Perovskite Light-Emitting Devices Co-regulated by Dual Polymer Additives

Efficient Inorganic Perovskite Light-Emitting Diodes by Inducing Grain Arrangement via a Multifunctional Interface

Highly Efficient Red Perovskite Light‐Emitting Diodes with Reduced Efficiency Roll‐Off Enabled by Manipulating Crystallization of Quasi‐2D Perovskites

Modification of mixed-halide quasi-2D perovskites by aminophylline towards efficient and spectrally stable blue light-emitting diodes with low efficiency roll-off

Marked Efficiency Improvement of FAPb0.7Sn0.3Br3 Perovskite Light-Emitting Diodes by Optimization of the Light-Emitting Layer and Hole-Transport Layer

Efficient CsPbBr 3 sky-blue perovskite light-emitting devices Co-regulated by dual polymer additives

Boosting the Efficiency and Stability of Perovskite Light-Emitting Devices by a 3-Amino-1-propanol-Tailored PEDOT:PSS Hole Transport Layer

High‐Radiance Near‐Infrared Perovskite Light‐Emitting Diodes with Improved Roll‐Off Degradation

Mixed 2D/3D Perovskite with Fine Phase Control Modulated by a Novel Cyclopentanamine Hydrobromide for Better Stability in Light-Emitting Diodes