Abstract:Diamond-like carbon (DLC) films are excellent candidates to improve tribological properties of silicon nitride (Si3N4) ceramic elements. Particular attentions have been paid to the preparation and analysis of DLC films on rings and discs. However, few researches on fabrication of DLC films on ball surfaces were carried out, especially on ceramic ball surfaces, because it is hard to achieve uniform coatings on ball surfaces.In this paper, DLC films on ceramic ball surfaces were studied with both experiment and FEA method. DLC films were deposited on Si3N4 ceramic ball and disc surfaces with plasma immersion ion implantation and deposition techniques (PIII-D). Surface topography of ceramic balls before and after coated with DLC films showed that DLC films on ceramic ball surfaces were uniform. Tribological tests under dry friction were conducted with a ceramic ball sliding against ceramic disc and, alternatively, one of the two surfaces was coated with DLC films. The tests demonstrated that DLC films on disc surfaces were worn, while ball surface films were partly flaked.3-D FEA models of ceramic ball sliding against ceramic disc were built and the ceramic ball/disc was coated with DLC films alternatively. DLC films were supposed to be bonded with ceramic substrates. The FEA stress fields in DLC films and on film/substrate interface showed that DLC films had great effects on stress distribution due to the low frictional coefficient and material difference from substrates. The friction force caused an increment of the stress near surfaces during sliding process, and the material difference leaded to discontinuous stress distribution on film/substrate interface. The shear stress on film/substrate interface was very slightly different between DLC films coated on ceramic balls and discs. Under almost the same shear stress, the flakes and wear of DLC films were mainly determined on the adherence of DLC films to ceramic substrates.

Tribological behavior of diamond-like carbon in-situ formed on Fe3C-containing carburized layer by plasma carburizing

Tribological Properties of Diamond-Like Carbon Films Deposited by Vacuum Arc

Catalytic Growth of Diamond-Like Carbon on Fe3C-containing Carburized Layer Through a Single-Step Plasma-Assisted Carburizing Process

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

The Formation of Diamond-Like Carbon Structure Anchored in the Nitrided Layer of M50 Steel During Plasma-Assisted Thermochemical Treatment

One-step plasma-assisted method for functionally graded Fe3O4/DLC coated carburized layer on steel

Microstructure and Tribological Properties of Diamond-Like Carbon and Tialsicn Nanocomposite Coatings

Structural, Mechanical and Tribological Behavior of Different DLC Films Deposited on Plasma Nitrided CF170 Steel

Role of Carbide Content in Governing the Mechanical and Tribological Properties of DLC/Cr3C2–NiCr Duplex Coatings

Tribological Performance of Ultrathin Diamond-Like Carbon Films Prepared by Plasma-Based Ion Implantation

Diamond-Like Carbon Thin Films Deposited On Ti6al4v Alloy Surface By Plasma Gun At Atmospheric Pressure

A study of the wear mechanism of diamond-like carbon films

Tribological Behaviors of Diamond-Like Carbon Coatings on Plasma Nitrided Steel Using Three BN-containing Lubricants

Experimental Study of Diamond-like Carbon Film on Aermet100 Steel and First-Principles Calculation of Interfacial Adhesion

Role of carbide content in governing the mechanical and tribological properties of DLC/Cr 3 C 2 –NiCr duplex coatings

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Growth and Tribological Property Characterization of Diamond-Like-Carbon Films

Tribological Property Analyses of Dlc Films on Ceramic Ball Surfaces with 3-D Fea Method and Experiments

The Role of Cermet Interlayer on Tribological Behaviors of DLC/Cr3C2–NiCr Duplex Coating from the Perspective of Carbonaceous Transfer Film Formation

Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates

Preparation and Tribological Properties Research of DLC Film on the Surface of Si_3N_4 Ceramics