Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

A Micromechanical Model for Mechanical Properties of Two Constituent Composite Materials

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

A Unified Micromechanical Model for the Mechanical Properties of Two Constituent Composite Materials. Part IV: Rubber-Elastic Behavior

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

A modified Halpin–Tsai model for predicting the elastic modulus of composite materials

On micromechanics approach to stiffness and strength of unidirectional composites

A Micromechanical Model for Interpenetrating Multiphase Composites

A thermo-viscoelastic model for particle-reinforced composites based on micromechanical modeling

On the Static and Dynamic Properties of Fiber-Reinforced Polymer Composites: A Three-Phase Constitutive Model

Establishment and simplification of micromechanical material model for viscoelastic woven fabric/hybrid composite

Prediction of Longitudinal Elastic Modulus of Unidirectional Short-Fiber-reinforced Composites

Micromechanical modeling of discontinuous long fiber reinforced composites

An efficient micromechanics-based finite element model for failure analysis of laminated composites

A Micromechanics Model For Estimating The Effective Thermoelastic Properties Of Layered Media

Oral/poster reference: icf100247pr

Micromechanics constitutive model for predicting the stress–strain relations of particle toughened bulk metallic glass matrix composites

CONSTITUTIVE RELATION OF DISCONTINUOUS REINFORCED METAL-MATRIX COMPOSITES

Micromechanical model of linear viscoelastic particle-reinforced composites with interphase

Stress Transfer Model and Micromechanic Analyses of Unidirectional Single-short-fiber Composite

Thermal-elastoplastic Constitutive Model of Particle-filled Composites

Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study