Abstract:Abstract The conductor on round core (CORC) cable wound with second-generation high-temperature superconducting (HTS) tapes is a promising cable candidate with superiority in current capacity and mechanical strength. The composing superconductors and the former are tightly assembled, resulting in a strong electro-magnetic interaction between them. Correspondingly, the AC loss is influenced by the cable structure. In this paper, a 3D finite-element model of the CORC cable is first built, and it includes the complex geometry, the angular dependence of critical current and the periodic settings. The modelling is verified by the measurements conducted for the transport loss of a two-layer CORC cable. Subsequently, the simulated results show that the primary transport loss shifts from the former to the superconductors as the current increases. Meanwhile, the loss exhibited in the outer layer is larger than that of the inner layer, which is caused by the shielding effect among layers and the former. This also leads to the current inhomogeneity in CORC cables. In contrast with the two-layer case, the simulated single-layer structure indicates stronger frequency dependence because the eddy current loss in the copper former is always dominant without the cancellation of the opposite-wound layers. The core eddy current of the single structure is denser on the outer surface. Finally, the AC transport losses among a straight HTS tape, a two-layer cable and a single-layer cable are compared. The two-layer structure is confirmed to minimise the loss, meaning an even-numbered arrangement makes better use of the cable space and superconducting materials. Having illustrated the electro-magnetic behaviour inside the CORC cable, this work is an essential reference for the structure design of CORC cables.

AC Losses Analysis of HTS Composite Conductors with Different Current Ramp Rates

AC Loss Investigation for Stacked HTS Cables with Gap Optimization

Investigation and Comparison of AC Losses on Stabilizer-Free and Copper Stabilizer HTS Tapes

Electromagnetic characteristics analysis of High Temperature Superconductor stack with magnetic substrate

Influence of Transport Mode on AC Loss Characteristics of a Bi-2223 Tape in a Multi-Tape Conductor

Effect of Dynamic Resistance on AC Loss in Stacked Superconducting Tapes

Numerical Investigation of Critical Current and Magnetization Loss Effect for Twisted Stacked Tape Cable Considering Field-Angle Dependency and Mechanical Torsion Degradation

AC Loss of Stacked HTS Tapes Subjected to a Rotating Magnetic Field

Investigation on AC Loss of a High Temperature Superconducting Tri-Axial Cable Depending on Twist Pitches

Analysis of AC Transport Loss in Conductor on Round Core Cables

AC losses in HTS sector shaped high-current conductors for fusion coils

Numerical Analysis on the Current Distribution and the Loss in HTS Stacked Tapes Considering Termination Resistances

Simulation of Current Profile and AC Loss of HTS Winding Wound by Parallel-Connected Tapes

A Study on Critical Current and AC Loss Characteristics of Novel 2G HTS Narrow Wires

A Study on AC Losses of HTS Pentagonal Conductors Consisting of 2G Wires Carrying DC Offset Transport Current

Influence of New Wire Structure on AC Loss of High-Temperature Superconducting Cables

Study on the Current Distribution and Structural Optimization of a High-Temperature Superconducting AC Power Cable

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

Magnetization Loss Characteristics in Superconducting Conductor on Round Core Cables with a Copper Former

Ac Loss Characteristics of A Cylindrical High Temperature Superconductor

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission