Abstract:Within the framework of magnetic confinement fusion, several projects worldwide are demonstrating the possibility of integrating high-temperature superconductors (HTS) in the coil systems. HTS-based technologies are highly attractive for practical applications because they can extend the operating margins of fusion coils in terms of higher temperatures, transport currents and magnetic fields. Based on the results achieved with the twisted-stacked tape cable, we have designed a novel low-loss HTS sector cable-in-conduit conductor, with a target of 60 kA at 4.5 K, 18 T, which is presently of interest for the DEMO Central Solenoid coil. In HTS cables, the AC losses can represent a significant limiting factor, therefore they must be taken into consideration both in the design phase and in the assessment of the overall magnet thermal budget. In this work, to assess the loss behavior and to optimize the cable design, we have explored different aspect ratios and arrangements of the stacked tapes within the cable layout. The magnetization losses are calculated with a 2D finite-element model based on the T-A formulation and analytical approximations based on the Brandt-Halse critical state model. Specifically, we have developed an analytical formulation that allows for the calculation of the instantaneous power losses in HTS stacked cables with a limited number of tapes per stack, achieving sufficient accuracy at high fields. The analytical model enables a sufficiently accurate assessment of the heat deposited on the conductor during those particular instants of a plasma scenario where the variation of the field is very high, such as during the critical initial discharge period of the plasma initiation.

AC Loss Investigation for Stacked HTS Cables with Gap Optimization

High-Current Stacked HTS Conductors With Non-uniform Gaps: Critical Current, AC Loss, and Fault Tolerance

Current Characteristics of Stacked HTS Conductors With Gap Optimization: Experiment and Modeling

Critical Current Enhancement for HTS Stacked Conductors with Optimized Gaps

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

AC Losses Analysis of HTS Composite Conductors with Different Current Ramp Rates

Environmental and Economic Analysis of High-current Stacked HTS Cables by Gap Optimization

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

Modelling Analysis of Periodically Arranged High-Temperature Superconducting Tapes

AC losses in HTS sector shaped high-current conductors for fusion coils

Effect of Dynamic Resistance on AC Loss in Stacked Superconducting Tapes

A Single-Phase AC HTS Cable with High Current-Carrying Capacity and Low Loss

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

AC Losses in Horizontally Parallel HTS Tapes for Possible Wireless Power Transfer Applications

AC Loss of Stacked HTS Tapes Subjected to a Rotating Magnetic Field

Numerical Analysis on the Current Distribution and the Loss in HTS Stacked Tapes Considering Termination Resistances

Numerical Investigation of Critical Current and Magnetization Loss Effect for Twisted Stacked Tape Cable Considering Field-Angle Dependency and Mechanical Torsion Degradation

Study on the Current Distribution and Structural Optimization of a High-Temperature Superconducting AC Power Cable

Ac Loss of A Multi-Layer Per Phase Tri-Axial Hts Cable with Balanced Current Distribution

Numerical Analysis of Stacked HTS Tapes in Rotating Magnetic Fields Using H and T-A Formulations

AC Loss Calculation of Tri-Axial HTS Cables