Abstract:As a promising cathode material for lithium–sulfur (Li-S) batteries, sulfurized polyacrylonitrile (SPAN) with uniform dispersion of short-chain sulfur moieties on its organic skeletons can effectively avoid lithium polysulfides dissolution and exhibit high specific capacity and long-term cycling stability. However, the practical battery performance of the SPAN cathode is dramatically limited by its relatively poor ionic and electronic accessibility. In this work, a three-dimensional (3D) network of Se0.05S0.95PAN nanofibers incorporated with commercial and low-cost Ketjen black (KB), denoted as 0.05S0.95PAN, is prepared through the electrospinning method. This unique 3D nanofiber structure is beneficial to transport lithium ions and electrons and accommodate volume expansion during lithiation/delithiation processes for Li-S batteries, leading to tremendous improvement of sulfur utilization, rate capability, and long-term cycling performance. 0.05S0.95PAN exhibits an ultrahigh reversible capacity of 1491 mAh g–1 at 0.1C and 1130 mAh g–1 at 5C and retains 1224 mAh g–1 after 500 cycles at 1C, corresponding to a capacity retention of 96.4%. This work proposes a facile strategy for the preparation of sulfur cathodes applicable in lithium–sulfur batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00585.Material preparation, material characterization, electrochemical measurements, SEM images of the ES-PAN fiber and fiber, elemental analysis data table, XPS spectrum of 0.05S0.95PAN, cycling performance of the 0.05S0.95PAN cathode at 0.5C, rate performance of 0.05S0.95PAN at different rates, CV curves of 0.05S0.95PAN and ES-Se0.05S0.95PAN at different rates and linear fit, HR-SEM images and EDS element mappings of 0.05S0.95PAN after cycling, XPS spectrum of the 0.05S0.95PAN cathode after cycling, SEM images of the 0.05S0.95PAN cathode before/after cycling, and comparison of the previous report (PDF)This article has not yet been cited by other publications.

Enhancing the Performance of Sulfurized Polyacrylonitrile Cathode by In-Situ Wrapping

Sulfurized polyacrylonitrile as cathodes for advanced lithium–sulfur batteries: advances in modification strategies

Modified Polyacrylonitrile Cross-Linked with Carboxymethyl Cellulose Constructing a Hydrogen Bonding Network for High-Performance Silicon Anodes

High Molecular Weight Polyacrylonitrile Precursor for S@pPAN Composite Cathode Materials with High Specific Capacity for Rechargeable Lithium Batteries.

Crosslinked Polyacrylonitrile Precursor for S@pPAN Composite Cathode Materials for Rechargeable Lithium Batteries

Improving the performance of Li–S batteries by reinforced PPy wrapping over acetylene black-coated sulfur

A Crosslinking Hydrogel Binder for High-Sulfur Content S@pPAN Cathode in Rechargeable Lithium Batteries

Encapsulation of S/SWNT with PANI Web for Enhanced Rate and Cycle Performance in Lithium Sulfur Batteries

In Situ Wrapping of the Cathode Material in Lithium-Sulfur Batteries.

Porous sulfurized poly(acrylonitrile) nanofiber as a long-life and high-capacity cathode for lithium–sulfur batteries

Sulfurized Polyacrylonitrile Cathode Derived From Intermolecular Cross-Linked Polyacrylonitrile For A Rechargeable Lithium Battery

A Universal Strategy for the Refined Frameworks and Improved Performance of Distinct Commercial Polyacrylonitriles in Sulfur Cathodes

A new insight into capacity fading of sulfurized polyacrylonitrile composite in carbonate electrolyte

Polyaniline-Coated S/Super-P Composites As Cathode Materials for High Performance Lithium-Sulfur Batteries

Electrospun Sulfurized Polyacrylonitrile Nanofibers for Long-Term Cycling Stability and High-Rate Lithium–Sulfur Batteries

S0.87Se0.13/CPAN Composites As High Capacity and Stable Cycling Performance Cathode for Lithium Sulfur Battery

Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li-S batteries

Sulfurization accelerator coupled Fe<sub>1-<i>x</i></sub>S electrocatalyst boosting SPAN cathode performance

Sulfurization accelerator coupled Fe1−xS electrocatalyst boosting SPAN cathode performance

Polyaniline-modified Cetyltrimethylammonium Bromide-Graphene Oxide-Sulfur Nanocomposites with Enhanced Performance for Lithium-Sulfur Batteries

Sulfurization accelerator coupled Fe 1− x S electrocatalyst boosting SPAN cathode performance