Abstract:The rapid capacity decay of lithium–sulphur batteries has been a significant obstacle for practical application, which is generally considered to arise from dissolution of lithium polysulphide in the electrolyte and diffusion away from the cathode. As the lithium content in the polysuphide increases with further discharge, capacity decay occurs also from the passivating effects by the formation of insoluble sulphides, further amplified by volume increase. More recently, weakening of sulphur adhesion to carbon with progress in discharge is also an important factor in the sulphur cathode degradation. In order to overcome capacity decay caused by all the above mechanisms, we have prepared a composite cathode made of sulphur and high density carbon nanotube (HD-CNT) forest scaffold that is able to interfacially adsorb and volumetrically confine the polysulphide species and accommodate the expansion of sulphur discharge products effectively. This cathode demonstrates very high electrochemical stability and high discharge capacity up to 200 full discharge/charge cycles even with the use of the basic organic ether electrolyte where polysulphide shows high solubility, thus providing evidence for confinement and interfacial contact. Retention and surface adsorption favoured by minimizing the wall-to-wall distance between the aligned CNTs arise from a decrease in the reaction energy of the adsorption. Computational simulation of the interface between polysulphide species and carbon nanotube surface provides first-principle confirmation of improved binding between C and S in the polysulphides as wall-to-wall distance is decreased. The HD-CNT scaffold is self-binding and highly-conducting thus the conventional additives of binder and carbon black are also fully eliminated. A high discharge capacity of 812mAhg−1 of sulphur (corresponding to 503mAhg−1 of the whole cathode material mass) is stably retained after 200 cycles at 400mAg−1 with a small average capacity decay of only 0.054% per cycle on average These encouraging results provide novel approaches to designing and fabricating long cycle life cathode in a lithium–sulphur battery.

Encapsulation of S/SWNT with PANI Web for Enhanced Rate and Cycle Performance in Lithium Sulfur Batteries

Porous sulfurized poly(acrylonitrile) nanofiber as a long-life and high-capacity cathode for lithium–sulfur batteries

Dual-shell Hollow Polyaniline/sulfur-Core/polyaniline Composites Improving the Capacity and Cycle Performance of Lithium–sulfur Batteries

Polyaniline-modified Cetyltrimethylammonium Bromide-Graphene Oxide-Sulfur Nanocomposites with Enhanced Performance for Lithium-Sulfur Batteries

Porous Spherical Polyacrylonitrile-Carbon Nanocomposite with High Loading of Sulfur for Lithium–sulfur Batteries

Sandwich-type porous carbon/sulfur/polyaniline composite as cathode material for high-performance lithium–sulfur batteries

Enhanced Cycle Performance of Hollow Polyaniline Sphere/sulfur Composite in Comparison with Pure Sulfur for Lithium–sulfur Batteries

Self-Stabilized Dispersion Polymerized Aniline/Carbon Nanotubes Based Flexible Interlayer Films for Boosting Performance Characteristics of Lithium-Sulfur Batteries

Polyaniline-Coated S/Super-P Composites As Cathode Materials for High Performance Lithium-Sulfur Batteries

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

One-step synthesis of nano-S/C@PANI composites for lithium-sulfur batteries with high rate and long lifespan

Soluble Polysulphide Sorption Using Carbon Nanotube Forest for Enhancing Cycle Performance in a Lithium–sulphur Battery

WN Nanocubes Embedded on Carbon Mesh Towards High-Performance LiS Batteries: Balancing Physical Capture, Chemical Adsorption and Catalysis Capability

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

Nanosulfur/polyaniline/graphene composites for high-performance lithium–sulfur batteries: One pot in-situ synthesis

In Situ Polymerization of Nanostructured Conductive Polymer on 3D Sulfur/Carbon Nanofiber Composite Network as Cathode for High‐Performance Lithium–Sulfur Batteries

Polyaniline-Wrapping Hollow Sulfur with Mcm-41 Template and Improved Capacity and Cycling Performance of Lithium Sulfur Batteries

Rational Fabrication of Nitrogen and Sulfur Codoped Carbon Nanotubes/MoS2 for High-Performance Lithium-Sulfur Batteries

Nanospace-confinement copolymerization strategy for encapsulating polymeric sulfur into porous carbon for lithium-sulfur batteries

Electrochemical Polymerization of Nonflammable Electrolyte Enabling Fast-Charging Lithium-Sulfur Battery

Two-in-one Integrated Sulfur Cathode with Multifunctional Multiwalled Carbon Nanotube/polyacrylic Acid Film for High -Performance Lithium Sulfur Batteries