Abstract:As a promising cathode material for lithium–sulfur (Li-S) batteries, sulfurized polyacrylonitrile (SPAN) with uniform dispersion of short-chain sulfur moieties on its organic skeletons can effectively avoid lithium polysulfides dissolution and exhibit high specific capacity and long-term cycling stability. However, the practical battery performance of the SPAN cathode is dramatically limited by its relatively poor ionic and electronic accessibility. In this work, a three-dimensional (3D) network of Se0.05S0.95PAN nanofibers incorporated with commercial and low-cost Ketjen black (KB), denoted as 0.05S0.95PAN, is prepared through the electrospinning method. This unique 3D nanofiber structure is beneficial to transport lithium ions and electrons and accommodate volume expansion during lithiation/delithiation processes for Li-S batteries, leading to tremendous improvement of sulfur utilization, rate capability, and long-term cycling performance. 0.05S0.95PAN exhibits an ultrahigh reversible capacity of 1491 mAh g–1 at 0.1C and 1130 mAh g–1 at 5C and retains 1224 mAh g–1 after 500 cycles at 1C, corresponding to a capacity retention of 96.4%. This work proposes a facile strategy for the preparation of sulfur cathodes applicable in lithium–sulfur batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00585.Material preparation, material characterization, electrochemical measurements, SEM images of the ES-PAN fiber and fiber, elemental analysis data table, XPS spectrum of 0.05S0.95PAN, cycling performance of the 0.05S0.95PAN cathode at 0.5C, rate performance of 0.05S0.95PAN at different rates, CV curves of 0.05S0.95PAN and ES-Se0.05S0.95PAN at different rates and linear fit, HR-SEM images and EDS element mappings of 0.05S0.95PAN after cycling, XPS spectrum of the 0.05S0.95PAN cathode after cycling, SEM images of the 0.05S0.95PAN cathode before/after cycling, and comparison of the previous report (PDF)This article has not yet been cited by other publications.

Sulfurized polyacrylonitrile as cathodes for advanced lithium–sulfur batteries: advances in modification strategies

Prospect of Sulfurized Pyrolyzed Poly(acrylonitrile) (s@ppan) Cathode Materials for Rechargeable Lithium Batteries

Crosslinked Polyacrylonitrile Precursor for S@pPAN Composite Cathode Materials for Rechargeable Lithium Batteries

Porous sulfurized poly(acrylonitrile) nanofiber as a long-life and high-capacity cathode for lithium–sulfur batteries

Polyaniline-Coated S/Super-P Composites As Cathode Materials for High Performance Lithium-Sulfur Batteries

A Crosslinking Hydrogel Binder for High-Sulfur Content S@pPAN Cathode in Rechargeable Lithium Batteries

Sulfurized Polyacrylonitrile Cathode Derived From Intermolecular Cross-Linked Polyacrylonitrile For A Rechargeable Lithium Battery

High Molecular Weight Polyacrylonitrile Precursor for S@pPAN Composite Cathode Materials with High Specific Capacity for Rechargeable Lithium Batteries.

Sulfur-Based Composite Cathode Materials for High-Energy Rechargeable Lithium Batteries

Recent Progress in Organic Polymers-Composited Sulfur Materials As Cathodes for Lithium-Sulfur Battery

Recent advances of hollow-structured sulfur cathodes for lithium-sulfur batteries

Facile synthesis of sulfurized polyacrylonitrile composite as cathode for high-rate lithium-sulfur batteries

Enhancing the Performance of Sulfurized Polyacrylonitrile Cathode by In-Situ Wrapping

Sandwich-type porous carbon/sulfur/polyaniline composite as cathode material for high-performance lithium–sulfur batteries

Electrospun Sulfurized Polyacrylonitrile Nanofibers for Long-Term Cycling Stability and High-Rate Lithium–Sulfur Batteries

Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li-S batteries

Current Status and Prospect of Cathode Materials for Lithium Sulfur Batteries

Recent Advances in Cathode Materials for Rechargeable Lithium–sulfur Batteries

Polyaniline-modified Cetyltrimethylammonium Bromide-Graphene Oxide-Sulfur Nanocomposites with Enhanced Performance for Lithium-Sulfur Batteries

Electrochemical Polymerization of Nonflammable Electrolyte Enabling Fast-Charging Lithium-Sulfur Battery

Electrochemical Enhancement of Lithium‐Ion Diffusion in Polypyrrole‐Modified Sulfurized Polyacrylonitrile Nanotubes for Solid‐to‐Solid Free‐Standing Lithium–Sulfur Cathodes