Abstract:An ultrahigh sensitivity sensor for temperature and strain measurement based on Solc-Sagnac interferometer is demonstrated, which is fabricated by fusing two segments of polarization maintaining fiber (PMF) with a rotation angle. As the lengths of the two PMFs are close to each other, a vernier effect is generated. Through theoretical and simulation analysis, it is found that as the fusion angle is 90°, the envelope can be eliminated and the waveform similar to that of ordinary single-ring Sagnac interferometer is realized. The longer PMF serves as the sensing part, and the changes in temperature and strain cause variations in the birefringence of the sensing fiber which leads to the shift of the interference signal. Three sets of temperature sensing experiments are carried out to demonstrate the influences of the length parameters of the two PMFs on the sensitivity. We find the temperature sensitivities are 16.9, 32.6, and 43.8 nm/°C, respectively, which is improved by 11.3, 21.9, and 29.4 times compared to the ordinary single-ring Sagnac interferometer. Meanwhile, the optimal fiber structure is used for strain sensing experiments whose sensitivity is 785 pm/ $\mu \varepsilon $ which increases by 28.8 times compared with ordinary single-loop interferometer. Then, the dual parameter measurement of temperature and strain is realized by using coefficient matrix. From the experimental results, it can be seen that the fiber structure with a fusion angle of 90° has the vernier effect to achieve the amplification of sensitivity and the corresponding interferometer possesses the advantages of easy demodulation and high accuracy due to the simple waveform.

Strain and Temperature Discrimination Using Two Sections of PMF in Sagnac Interferometer

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

A Compact Fiber Sensor Based on the High Birefringence Polarization Maintaining Fiber for Simultaneous Strain and Temperature Measurement

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

Dual-Parameter Sensing of Parallel Fiber Sagnac Interferometer Based on Vernier Effect

Ultra-high Sensitivity Sensor for Temperature and Strain Measurement Based on Solc-Sagnac Interferometer

Temperature and Lateral Pressure Sensing Using a Sagnac Sensor Based on Cascaded Tilted Grating and Polarization-Maintaining Fibers

Ultrasensitive Temperature Sensor with Vernier-effect Improved Fiber Michelson Interferometer.

Experimental study on a parallel optical fiber Sagnac loops-based sensor with the advantages of both high sensitivity and ultra-wide measurement range

Paralleled Sagnac Interferometer and Mach–Zehnder Interferometer for Enhanced Measurements Sensitivity Based on Vernier Effect

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Ultrasensitive Temperature and Strain Sensor Based on a Hybrid Fiber Interferometer With the Vernier Effect

Optical fiber temperature sensor with Vernier effect formed by Mach–Zehnder interferometer cascaded Sagnac interferometer based on Hollow-core photonic crystal fiber

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Study on Vernier effect of orthogonal Mach-Zehnder interferometers based on Polarization-maintaining fiber

Experimental Study of Fiber-Optic Temperature Sensor Based on Dual FSIs

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

Sagnac interferometer-based optical fiber strain sensor with exceeding free spectral measurement range and high sensitivity