Abstract:Recent studies have shown that electrical systems in wind power conversion are subject to a 67 % failure rate, and conventional three-phase generators are considered to be the most sensitive to these faults. Induction generator current harmonics are a major source of torque ripples causing acoustic noise and vibrations. These ripples can progressively increase under faulty operating conditions. In six-phase machines, there is appearance of high harmonic currents in the air gap as space harmonics. Power electronic converters are also subject to faults, the most common being Short-Circuit (SC) and Open-Circuit (OC) faults. SC faults cause large peaks in the line currents, which trigger the protection devices, resulting in a complete shutdown of the production system. OC faults, on the other hand, cause imbalances in the phases, but the system remains in operation.Direct Torque Control (DTC) based on Space Vector Modulation (SVM) at constant switching frequency is an effective solution to tackle induction generator current harmonics. This paper proposes a DTC combined with a Proportional Integral Fuzzy Logic Controller (PIFLC) optimized by Particle Swarm Optimization (PSO) in order to overcome the problems of torque ripples. Furthermore, using Vector Space Decomposition (VSD) and the Modified Space Vector Pulse Width Modulation (MSVPWM) strategy, a significant reduction of harmonics in the air-gap can be achieved.Simulations were carried out under MATLAB/Simulink, and the results obtained demonstrate the superiority of the proposed DTC-PIFLC-PSO controller in terms of robustness against wind speed variations and under faulty switch conditions in the power converter of the Dual Star Induction Generator ( DSIG) generator. In addition, a comparative study with the classical PI controller is presented to show the effectiveness of the DTC-PIFLC-PSO controller against faults with a significant reduction in the Total Harmonic Distortion (THD) during both faulty and non-faulty conditions.

Fault-Tolerant Control of VSI Driven Double Star Induction Machine for Electric Naval Propulsion

A Fault Tolerant Control Strategy for Dual Three-Phase PMSM under Single-Phase Open Circuit Fault Considering Inductance Asymmetry

Fault-Tolerant Control of Dual Three-Phase PMSM Based on Minimum Copper Loss under Multi-Phase Open and Open-Switch Faults

Fault-Tolerant Control Based on Sliding Mode Controller for Double-Star Induction Machine

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

Fault diagnosis and fault-tolerant finite control set-model predictive control of a multiphase voltage-source inverter supplying BLDC motor

A Fault-Tolerant Direct Torque Control Strategy for A Brushless Dc Motor Driven by A Single Sided Matrix Converter

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Robust Control Based on Adaptative Fuzzy Control of Double-Star Permanent Synchronous Motor Supplied by PWM Inverters for Electric Propulsion of Ships

Performance Comparison of Open-Circuit Fault-Tolerant Control Strategies for Multiphase Permanent Magnet Machines for Naval Applications

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Fixed Joint Double Fifteen-Phase Induction Motor Control and Fault-Tolerant Control in Ship Propulsion System

Control of Doubly-Fed Induction Motor Based Shipboard Propulsion System for More-Electric Ships

Current Sensor Fault Diagnosis and Tolerant Control for VSI-Based Induction Motor Drives

Modeling and control of 15-phase induction machine under one phase open circuit fault

Open-circuit Fault-tolerant Control for DTP-SynRM Based on Rotation Coordinate Transformation

Simulation of DTP-PMSM Drive and Fault-tolerant Control System Based on Six-phase Eight-leg VSI

Direct torque control of a dual star induction generator based on a modified space vector PWM under fault conditions

High Order Sliding Mode Optimal Current Control of Five Phase Permanent Magnet Motor under Open Circuited Phase Fault Conditions

Experimental Investigation of Passive Fault Tolerant Control for Induction Machine Using Sliding Mode Approach

A New Control Strategy with Fault Ride‐through Capability for VSC‐based Offshore High Power Oil Pump Motor Power Supply System