Abstract:An experimental investigation to verify the suitability of MoOx as the hole collection layer for a-Si:H based thin film photovoltaic cell is carried out. The photovoltaic cell investigated has the structure of MoOx (hole collection layer) / intrinsic a-Si:H (photoactive layer) / phosphorus doped a-Si:H (electron collection layer) / Ag (back reflector electrode); all deposited in that order onto an Asahi glass (type U) substrate, which is also acting as the transparent front electrode for the cell. The effects of different post deposition annealing temperatures are investigated. The highest efficiency values are obtained for the cells annealed at 120oC. For the photovoltaic cell with 100 nm thick photoactive layer, the highest efficiency is measured to be 6.46 % with an open current voltage (Voc) of 827 mV and a short current density of (Jsc) of 10.44 mA/cm2. For the photovoltaic cell with 300 nm thick photoactive layer, the highest efficiency is measured to be 7.93 % with Voc of 818 mV and Jsc of 13.24 mA/cm2. The efficiency measurements are carried out under AM1.5 test conditions. Jsc values are corrected according to the external quantum efficiency measurements of the cells in the AM1.5 photovoltaic spectrum region between 270 nm and 800 nm. Compared to the reference cell with boron doped μ-SiOx layer acting as the hole collection layer, the cell with MoOx hole collection layer has similar FF, lower Voc, higher Jsc for wavelength up to the green light region of the AM1.5 spectrum and lower Jsc for the longer wavelengths.

Interface Engineering of Graphene/silicon Solar Cells by Introducing an Ultrathin Magnesium Oxide Interlayer

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

MoOx Hole Collection Layer for A-Si: H Based Photovoltaic Cells

Modeling and Simulation of Graphene-Gated Graphene-Gaas Schottky Junction Field-Effect Solar Cell for Its Performance Enhancement

Improved Performance of Titanium Oxide/Silicon Oxide Electron‐Selective Contacts by Implementation of Magnesium Interlayers

Role of Interfacial Oxide in High-Efficiency Graphene-Silicon Schottky Barrier Solar Cells.

Microcrystalline Silicon‐carbon Alloys As Anti‐reflection Window Layers in High Efficiency Thin Film Silicon Solar Cells

Strong and Reversible Modulation of Carbon Nanotube-Silicon Heterojunction Solar Cells by an Interfacial Oxide Layer.

Interface Engineering and Efficiency Improvement of Monolayer Graphene–silicon Solar Cells by Inserting an Ultra-Thin LiF Interlayer

Interface Engineering for Efficient and Stable Chemical-Doping-free Graphene-on-silicon Solar Cells by Introducing a Graphene Oxide Interlayer

Enhanced Photovoltaic Performances of Graphene/Si Solar Cells by Insertion of an MoS2 Thin Film

The influence of the interface layer between the electron transport layer and absorber on the performance of perovskite solar cells

Design and Photovoltaic Properties of Graphene/Silicon Solar Cell

Investigation of graphene-based Schottky junction solar cell with heavy-doped silicon

Interface Engineering of Graphene-Silicon Heterojunction Solar Cells

Carbon quantum dots interfacial modified graphene/silicon Schottky barrier solar cell

Surface modification and interface engineering to enhance the performance of 2D-graphene/3D-silicon Schottky junction solar cells

Remarkable enhancement of graphene/Si Schottky junction solar cell performance with effective chemical treatments

Developed Graphene/Si Schottky Junction Solar Cells Based on the Top-Window Structure

Graphene Quantum Dots Open Up New Prospects for Interfacial Modifying in Graphene/Silicon Schottky Barrier Solar Cell

50-Μm Thick Flexible Dopant-Free Interdigitated-Back-contact Silicon Heterojunction Solar Cells with Front MoOx Coatings for Efficient Antireflection and Passivation.