Abstract:Particle dispersion and deposition in man-made enclosed environments are closely related to the well-being of occupants. The present study developed a three-dimensional drift-flux model for particle movements in turbulent indoor airflows, and combined it into Eulerian approaches. To account for the process of particle deposition at solid boundaries, a semi-empirical deposition model was adopted in which the size-dependent deposition characteristics were well resolved. After validation against the experimental data in a scaled isothermal chamber and in a full-scale non-isothermal environmental chamber, the drift-flux model was used to investigate the deposition rates and human exposures to particles from two different sources with three typical ventilation systems: mixing ventilation (MV), displacement ventilation (DV), and under-floor air distribution (UFAD). For particles originating from the supply air, a V-shaped curve of the deposition velocity variation as a function of particle size was observed. The minimum deposition appeared at 0.1–0.5μm. For supermicron particles, the ventilation type and air exchange rate had an ignorable effect on the deposition rate. The movements of submicron particles were like tracer gases while the gravitational settling effect should be taken into account for particles larger than 2.5μm. The temporal increment of human exposure to a step-up particle release in the supply air was determined, among many factors, by the distance between the occupant and air outlet. The larger the particle size, the lower the human exposure. For particles released from an internal heat source, the concentration stratification of small particles (diameter <10μm) in the vertical direction appeared with DV and UFAD, and it was found the advantageous principle for gaseous pollutants that a relatively less-polluted occupied zone existed in DV and UFAD was also applicable to small particles.

The Influence of Ventilation Mode and Personnel Walking Behavior on Distribution Characteristics of Indoor Particles

The Effect of Human Walking on Distribution Characteristics of Indoor Particulate Matter

Diffusion Characteristics of Indoor Particles in Different Ventilation Strategies Room

Experiments and Simulations of Human Walking-Induced Particulate Matter Resuspension in Indoor Environments

A numerical study of influence of human body movement on indoor air-flow and contaminants distribution

The Transmission Characteristics of Indoor Particles under Two Ventilation Modes

The transmission characteristics of indoor particles under different ventilation conditions

Modeling particle dispersion and deposition in indoor environments

Study On The Characteristics Of Indoor Inhalable Particle Distribution In Underfloor Air Supply System

Particulate Pollution in Ventilated Space: Analysis of Influencing Factors.

Experiment and numerical investigation of inhalable particles and indoor environment with ventilation system

The Effects of Ventilation and Floor Heating Systems on the Dispersion and Deposition of Fine Particles in an Enclosed Environment

Numerical Study of the Effect of Ventilation Pattern on Coarse, Fine, and Very Fine Particulate Matter Removal in Partitioned Indoor Environment

Numerical Study on the Influence of Human Walking on Contaminant Transport Indoors by Using Momentum Theory Method

Study on the Impacts of Human Walking on Indoor Particles Dispersion Using Momentum Theory Method

Effects of Air-Ventilation Speed on Size-Resolved Pollutant Particle Dispersion in an UFAD Room

Study on Diffusion Law of Aerosol Particles in Indoor Human Droplets

Experimental study on resuspension characteristics of inhalable particles in under floor air distribution system

Inhalable Particles Transportation of the Kitchen in Different Ventilation Methods

Numerical Investigation Of Indoor Aerosol Particle Dispersion Under Stratum Ventilation And Under Displacement Ventilation

How Particle Resuspension from Inner Surfaces of Ventilation Ducts Affects Indoor Air Quality-A Modeling Analysis