Abstract:Silicone thermal grease can reduce the contact thermal resistance of thermal interfaces and has been widely used as a thermal interface material in the thermal design of spacecraft. Silicone thermal grease gradually degrades owing to the dry-out of silicone oil during a long service period and breaks the validity of the thermal interface and induces thermal overload in a spacecraft. In this study, a mechanism-based prediction method for the silicone thermal grease loss in a space environment is proposed. The prediction of long-term thermal grease loss is realised by evaluating the variation in its effective thermal conductivity. In the prediction method, an improved multi-component thermal conductivity model was established to determine the thermal conductivity of thermal grease with multiple filler sizes and a high filler volume fraction. Then, the silicone oil loss induced by complex penetration, crawl, and volatilisation were evaluated with an equivalent capillary model and a volatilisation model. The behaviour of the silicone oil loss, the primary cause of dry-out degradation, was clarified. The variation in the effective thermal conductivity of thermal grease under different contact angles, operating temperatures, and connection surface dimensions was investigated. The results show that the dominant factor gradually changes from capillary loss to volatilisation loss during dry-out degradation. The effective thermal conductivity decreased faster at higher operating temperatures, and the effective thermal conductivity decreased slower with an increase in the contact angle and connection interface dimensions. The present work provides insights for the design of silicone thermal greases for space utilization.

Monitoring the Thermal Grease Degradation Based on the IGBT Junction Temperature Cooling Curves

Monitoring Of The Cooling System Via Thermal Parameters

A 3-D Thermal Network Model for the Temperature Monitoring of Thermal Grease As Interface Material

Thermal-Fluid Co-Simulation and Modelling of IGBT with Thermal Resistance Network

Condition Monitoring of IGBT Module and Forced Air Cooling System Using Time Constants of Heat Sink Temperature Cooling Curve

A review of the cooling methods based on IGBT module and the application of micro-channel cooling in IGBT Chinese Full Text

A Novel Method For On-Line Junction Temperature Measurement Of Power Modules

A Thermal Network Model for Monitoring IGBT Chip Solder Degradation Based on Feedback PI Control

A Direct Bonding Copper Degradation Monitoring Method for Insulated Gate Bipolar Transistor Modules: Boundary-dependent Thermal Network Combined with Feedback Control

Thermal Resistor and Capacitor Parameter Identification Using Cooling Curve of IGBT Module

Non-Contact Degradation Evaluation for IGBT Modules Using Eddy Current Pulsed Thermography Approach

Degradation Monitoring of Power Modules Based on Frequency-Domain Thermal Model

A Novel Condition Monitoring Method for Full Modes of Package Degradation in High Power Modules Based on Hysteresis Curves of Forward Voltage Drop

Intelligent Condition Monitoring of Multiple Thermal Degradation of IGBT Modules Based on Case Temperature Matrix

3D Thermal Resistance Model for Real-Time Temperature Monitoring of Multi-Chip IGBT Modules

Diagnosing IGBT Module Degradation by Frequency-domain Heat Flow Analysis

Thermal Network Parameter Estimation Using Cooling Curve of IGBT Module

A Novel Junction Temperature Estimation Method Independent of Bond Wire Degradation for IGBT

Theoretical analysis on thermal grease dry-out degradation in space environment

Condition Monitoring Igbt Module Bond Wires Fatigue Using Short-Circuit Current Identification

A Robust Power Loss Observer for Thermal Model Method-Based IGBT Junction Temperature Monitoring