Abstract:As a core component of photovoltaic power generation systems, insulated gate bipolar transistor (IGBT) modules continually suffer from severe temperature swings due to complex operation conditions and various environmental conditions, resulting in fatigue failure. The junction temperature prediction guarantees that the IGBT module operates within the safety threshold. The thermal equivalent circuit model is a common approach to predicting junction temperature. However, the model parameters are easily affected by the solder aging. An accurate temperature prediction by the model is impossible during service. This paper proposes an improved thermal equivalent circuit model that can remove the effect of solder aging. Firstly, the solder aging process is monitored in real-time based on the case temperatures. Secondly, the model parameters are corrected by the thermal impedance from chip to baseplate based on the linear thermal characteristic. The simulation and experimental results show that the proposed model can reduce the temperature prediction error by more than 90% under the same aging condition. The proposed method only depends on the case temperatures to correct the model parameters, which is more economical. In addition, the experimental and simulation analysis in this work can help students of power electronics courses have an in-depth knowledge of power devices' mechanical structure, heat dissipation principles, temperature distribution, junction temperature monitoring, and so on.

3D Thermal Resistance Model for Real-Time Temperature Monitoring of Multi-Chip IGBT Modules

Thermal-Fluid Co-Simulation and Modelling of IGBT with Thermal Resistance Network

An H∞ Observer-Based 3-D Thermal Monitoring Method for Multi-Chip IGBT Modules with Robustness to Model Parameter and Power Loss Uncertainty

A Novel Method For On-Line Junction Temperature Measurement Of Power Modules

An Improved Transient Electro-Thermal Model for Paralleled IGBT Modules

Simplified Thermal Modeling for IGBT Modules with Periodic Power Loss Profiles in Modular Multilevel Converters

A 3-D Temperature-Dependent Thermal Model of IGBT Modules for Electric Vehicle Application Considering Various Boundary Conditions

A Transient 3-D Thermal Modeling Method for IGBT Modules Considering Uneven Power Losses and Cooling Conditions

A Robust Power Loss Observer for Thermal Model Method-Based IGBT Junction Temperature Monitoring

Analytical Modeling of Forced-Air Cooling Heatsink by Considering Air Temperature Rise in Channel and Coupling of Multiple Heat Sources

A Lumped Thermal Model Including Thermal Coupling and Thermal Boundary Conditions for High-Power IGBT Modules

A Network Topological Approach-Based Transient 3-D Electrothermal Model of Insulated-Gate Bipolar Transistor

A 3D Thermal Network Model for Monitoring Imbalanced Thermal Distribution of Press-Pack IGBT Modules in MMC-HVDC Applications

Real-Time Average Junction Temperature Estimation for Multichip IGBT Modules With Low Computational Cost

An Adaptive Electrothermal Model for Estimating the Junction Temperature of Power Device

A Thermal Network Model for Multichip Power Modules Enabling to Characterize the Thermal Coupling Effects

Impact Of The Thermal-Interface-Material Thickness On Igbt Module Reliability In The Modular Multilevel Converter

Real-Time Temperature Prediction of Power Devices Using an Improved Thermal Equivalent Circuit Model and Application in Power Electronics

Dynamic junction temperature estimation via built-in negative thermal coefficient (NTC) thermistor in high power IGBT modules

Comprehensive Thermal Resistance Model of Forced Air Cooling System for Multiple Power Chips

Improved Temperature Monitoring and Protection Method of Three-Level NPC Application Based on Half-Bridge IGBT Modules