Abstract:The thermal reliability of two different high-power insulated gate bipolar transistor (IGBT) modules was studied under both conduction and switching regimes by experimental and numerical approaches. Indeed, the reliability of semiconductor devices is tightly linked to the junction temperatures reached in the IGBT, which is a function of the diode chips present in such devices and its operating condition. However, measurements of the semiconductor temperatures are often difficult to be done, thus requiring modeling and simulation tools to accurately evaluate the instantaneous temperature under different thermal loads. For this reason, a transient 3D heat transfer numerical model of two different IGBT power devices was proposed using the Finite Element Method, assuming that heat is dissipated on the IGBT by natural convection and radiation. These simulations were validated with experimental measurements, obtained through infrared thermography, performed for the IGBT modules either opened or enclosed, varying the heat source, the module orientation and under conduction or switching regime. For the switching regime, power losses due to the gate-closing and gate-opening transitions between conducting and non-conducting states were taken into consideration. The heat losses were modeled assuming the time-dependent heat dissipation obtained by previous electrical simulations, and it was compared with time-averaged heat source solutions. Results showed that averaging the heat source can significantly reduce the computational time, allowing quick design explorations. Overall, the numerical model led to deviations of less than 16% over the transient heating and at steady-state. Finally, the impact of a heat sink attached to the IGBT was studied, demonstrating that the proposed model can be used for accurate and quick investigations of potential failures and for the development of more efficient IGBT devices.

A 3-D Thermal Network Model for the Temperature Monitoring of Thermal Grease As Interface Material

Thermal-Fluid Co-Simulation and Modelling of IGBT with Thermal Resistance Network

A Thermal Network Model Considering Thermal Coupling Effect and TIM Degradation in IGBT Modules

A 3-D Thermal Network Model for IGBT Modules Considering Temperature Dependence of Heat Dissipation and Thermal Coupling

A Network Topological Approach-Based Transient 3-D Electrothermal Model of Insulated-Gate Bipolar Transistor

A Thermal Network Model for Monitoring IGBT Chip Solder Degradation Based on Feedback PI Control

A 3-D Temperature-Dependent Thermal Model of IGBT Modules for Electric Vehicle Application Considering Various Boundary Conditions

An Improved Transient Electro-Thermal Model for Paralleled IGBT Modules

Monitoring the Thermal Grease Degradation Based on the IGBT Junction Temperature Cooling Curves

3D Thermal Resistance Model for Real-Time Temperature Monitoring of Multi-Chip IGBT Modules

A Transient 3-D Thermal Modeling Method for IGBT Modules Considering Uneven Power Losses and Cooling Conditions

Impact Of The Thermal-Interface-Material Thickness On Igbt Module Reliability In The Modular Multilevel Converter

A 3-D-Lumped Thermal Network Model For Long-Term Load Profiles Analysis In High-Power Igbt Modules

A 3D Thermal Network Model for Monitoring Imbalanced Thermal Distribution of Press-Pack IGBT Modules in MMC-HVDC Applications

A Three-Dimensional Boundary-Dependent Compact Thermal Network Model for IGBT Modules in New Energy Vehicles

A Thermal Network Model for Multichip Power Modules Enabling to Characterize the Thermal Coupling Effects

A 3-D Thermal Model Including Thermal Coupling for Insulated Gate Bipolar Transistor Module

A Thermal Twin Modeling Method of Press Pack IGBT Based on Power Loss

Thermal and electrical evaluation of insulated gate bipolar transistor (IGBT) power modules

A Direct Bonding Copper Degradation Monitoring Method for Insulated Gate Bipolar Transistor Modules: Boundary-dependent Thermal Network Combined with Feedback Control

A Temperature-Dependent Thermal Model of IGBT Modules Suitable for Circuit-Level Simulations