Abstract:Organic rankine cycle (ORC) has been regarded as the most promising measure for converting low-grade waste heat into electricity during the past decades. To take better advantage of ORC, the parameters of ORC and its heat integration with the background process streams should be optimized simultaneously. In this work, the decision variables of ORC not only include the operating temperature, pressure, and flowrate but also contain the type of working fluids. A set of 43 pure fluids and 36 binary mixtures are adopted from the literature as candidates for working fluids. In addition, both the supercritical and subcritical conditions of ORCs are involved. Background process streams and ORC streams with variable temperatures and flowrates are synthesized for heat integration. Such a complicated heat integration problem cannot be solved by traditional methods, where the temperature and flowrates of streams are fixed. We develop a two-level optimization strategy. The outer level identifies the promising working fluids and their compositions, temperatures, and pressures inside the ORC. The inner level deals with the heat integration problem, where the temperatures and flowrates of streams are the variables. The flowrate of ORC, the utility consumption, as well as area of heat exchangers are optimized in the inner level based on the vertical heat transfer assumption of pinch technology. The outer level is solved by a genetic algorithm, while the inner level is solved by a deterministic algorithm. Case studies show that the inner level model for heat integration is superior in both efficiency and quality of the solution. We also provide an overview of the best ORC selection for a single waste heat source between 100 and 300 degrees C and show applicability for the integration of ORC and background processes with multiple streams in case studies.

Thermal Stability and Material Compatibility for Hexamethyldisiloxane As the Working Fluids of Organic Rankine Cycle

Experimental and Simulation Analysis of Siloxane Mixtures Used in Organic Rankine Cycle with Thermal Stability Limits

Material Compatibility of Hexamethyldisiloxane As Organic Rankine Cycle Working Fluids at High Temperatures

Advances in Working Fluids for Organic Rankine Cycle

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Oxidation decomposition mechanism of hexamethyldisiloxane

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

A novel method for predicting the thermal stabilization temperature of organic Rankine cycle system working fluids based on transition state theory

Thermodynamic Analysis and Optimization of Organic Rankine Cycles Based on Radial-Inflow Turbine Design

Review of the Working Fluid Thermal Stability for Organic Rankine Cycles

Influence of Alkane Working Fluid Decomposition on Supercritical Organic Rankine Cycle Systems

Investigation of Organic Rankine Cycle Integrated with Double Latent Thermal Energy Storage for Engine Waste Heat Recovery

Thermal Stability of Some Hydrofluorocarbons As Supercritical ORCs Working Fluids

Thermal performance analysis of a biomass-fired organic rankine cycle

Thermal stability of a mixed working fluid (R513A) for organic Rankine cycle

A ReaxFF-based molecular dynamics study of the pyrolysis mechanism of hexamethyldisiloxane

Feasibility study of the high‐temperature organic Rankine cycle in combined heat and power state from energy, exergy, and economic point of view

Chemical Thermodynamics Prediction Method for the Working Fluid Thermal Stability

Thermal stability and pyrolysis products of HFO-1234yf as an environment-friendly working fluid for Organic Rankine Cycle

Measurement and modeling of liquid thermal conductivity of linear siloxanes: Octamethyltrisiloxane (MDM) and Hexamethyldisiloxane (MM)

Thermal stability and decomposition mechanism of HFO‐1336mzz(Z) as an environmental friendly working fluid: Experimental and theoretical study