Abstract:ORCs (Organic Rankine Cycles) are of great significance for energy conservation and CO2 emission reductions owing to their usage in converting low grade waste heat to electrical power. The working fluid properties are the key to getting good cycle performance. The advantages of CO2 and hydrocarbon working fluids for use in ORCs are investigated here for six binary mixtures: CO2+propane/n-butane/iso-butane/n-pentane/iso-pentane/neo-pentane. A transcritical ORC simulation program was used to predict the cycle performance for various hydrocarbon mass fraction working fluids for a turbine inlet temperature of 453.15 K and inlet pressure of 1.3pc. The predicted cycle performance is used to divide the six working fluids into three categories relative to the thermal efficiency of an ORC using pure CO2. The first working fluid type (CO2+propane) has increasing efficiencies with increasing hydrocarbon mass fraction while the second type have maximum thermal efficiencies at hydrocarbon mass fractions of 0.3, and the third type has maximums at a mass fraction of 0.2. In addition, the thermodynamics relative efficiency, ξ, is highest for CO2+propane and then decreases for CO2+iso-butane, CO2+ n-butane, CO2+neo-pentane, CO2+iso-pentane, and CO2+n-pentane with the lowest. Then, the cycle efficiencies of the three working fluid types were analyzed from the perspective of the hydrocarbon molecular structure. The results show that longer main carbon chains and branched carbon chains have larger pc and Tc, with this critical property leading to higher efficiencies at low hydrocarbon mass fractions. Lower p′c and T′c lead to higher efficiencies at high hydrocarbon concentrations. Thus, there is a trade-off between the cycle efficiency and the hydrocarbon mass fraction. Finally, the three best working fluid mixtures, 0.3CO2/0.7propane, 0.7CO2/0.3neo-pentane and 0.8CO2/0.2pentane, were further analyzed according to their cycle characteristics. The 0.3CO2/0.7propane mixture working fluid had the best cycle efficiency for these conditions.

Thermal Stability of Some Hydrofluorocarbons As Supercritical ORCs Working Fluids

Thermal stability and decomposition mechanism of HFO‐1336mzz(Z) as an environmental friendly working fluid: Experimental and theoretical study

Thermal stability and pyrolysis products of HFO-1234yf as an environment-friendly working fluid for Organic Rankine Cycle

Energy, Exergy, Economic Performance Investigation and Multi-Objective Optimization of Reversible Heat Pump-Organic Rankine Cycle Integrating with Thermal Energy Storage

Influence of Alkane Working Fluid Decomposition on Supercritical Organic Rankine Cycle Systems

Thermal stability of a mixed working fluid (R513A) for organic Rankine cycle

Screening of hydrocarbons as supercritical ORCs working fluids by thermal stability

Review of the Working Fluid Thermal Stability for Organic Rankine Cycles

Thermal Stability and Material Compatibility for Hexamethyldisiloxane As the Working Fluids of Organic Rankine Cycle

Performance analysis and optimization of organic Rankine cycle (ORC) for waste heat recovery

A novel method for predicting the thermal stabilization temperature of organic Rankine cycle system working fluids based on transition state theory

Combustion mechanism and product characteristics of 2,3,3,3-tetrafluoropropene as an environmentally friendly working fluid for organic Rankine cycle

Multi-objective Optimization of Organic Rankine Cycle Using Hydrofluorolefins (hfos) Based on Different Target Preferences

Exploration and Analysis of CO2 + Hydrocarbons Mixtures As Working Fluids for Trans-critical ORC

Thermodynamic Investigation on Low GWP Drop‐in Alternatives to HFC‐245fa in Ejector Refrigeration Cycle for Air Condition Application

Material Compatibility of Hexamethyldisiloxane As Organic Rankine Cycle Working Fluids at High Temperatures

Influence of Working Fluid Properties on System Performance and Screen Evaluation Indicators for Geothermal Orc (organic Rankine Cycle) System

Vapor-liquid Equilibrium Measurement and Heating Performance Modeling on Eco-Friendly Zeotropic Blends of CO2/R1234ze(Z) and CO2/R1336mzz(E)

Chemical Thermodynamics Prediction Method for the Working Fluid Thermal Stability

Working fluid selection for low temperature transcritical organic Rankine cycle

Thermal Decomposition and Oxidative Decomposition Mechanism of HFC-134a by Experimental and DFT Method