Abstract:The no-insulation (NI) winding technique is promising to be applied in the persistent-current mode (PCM) operation of high-temperature superconducting (HTS) coils to provide those advantages. To apply the NI PCM coil, its demagnetization behaviour (i.e., decay of persistent DC current) by external AC field, which occurs in maglev trains, electric machines, and other dynamic magnet systems, is essential to be understood. For this purpose, a 3D FEM model, capturing the full electromagnetic properties of NI HTS coils, is established. This work has studied three kinds of AC fields, observing the impact of turn-to-turn contact resistivity on demagnetization rates, which is attributed to current distribution modulations. Under transverse AC field, the lower contact resistivity attracts more transport current to flow in the radial pathway to bypass the 'dynamic resistance' generated in the superconductor, leading to slower demagnetization. Under axial AC field, the demagnetization rate exhibits a non-monotonic relation with the contact resistivity: (1) the initial decrease of contact resistivity leads to concentration of induced AC current on the outer turns, which accelerates the demagnetization; (2) the further decrease of contact resistivity makes the current smartly redistribute to avoid to flow through the loss-concentrated outer turns, thus slowing down the demagnetization. Under the rotating DC field, a hybrid of the transverse and axial fields, the impact of contact resistivity on the demagnetization rate exhibits combined characteristics of the transverse and axial components. Besides, quantitative prediction on the demagnetization rate of NI PCM coil under external AC field is instructive for practical designs and operations, which is tried by this 3D FEM model, and a comparison with experimental result is conducted.

Persistent Current Switch for HTS Superconducting Magnets: Design, Control Strategy, and Test Results

A Pulsed Current Charging Mechanism for High Temperature Superconducting Magnets

Control Design of a Modular Current Source Power Conditioning System for High Temperature SMES

Fast Current Regulation and Persistent Current Maintenance of High-Temperature Superconducting Magnets with Contact Power Supply and Flux Pump

Development of a Conduction-Cooled HTS SMES

A multimodule hybrid converter for high-temperature superconducting magnetic energy storage systems (HT-SMES)

Thermal Analysis of Persistent Current Switch for Magnetic Resonance Imaging Superconducting Magnet

Persistent-Current Switch for Pancake Coils of Rare Earth-Barium-Copper-Oxide High-Temperature Superconductor: Design and Test Results of A Double-Pancake Coil Operated in Liquid Nitrogen (77-65 K) and in Solid Nitrogen (60-57 K)

A full-bridge flux pump using two switches:numerical model and experimental prototype

Design and Test of HTS Power Converting System with Multiple Magnets Considering Various Sequential Controls of Heater-Triggered Switches

Controlled commutation modes in a switch based on HTS composites

A direct current conversion device for closed HTS coil of superconducting magnetic energy storage

Study on demagnetization behaviour of no-insulation (NI) persistent-current mode (PCM) HTS coil under external AC fields by 3D FEM simulation

An Experimental Study on the Controllability of HTS Coils in MAGLEV Systems

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Development of Testing Device for Critical Current Measurements for HTS/LTS

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

A Practical Superconducting DC Dynamo for Charging Conduction-Cooled HTS Magnet

A superconducting switch using induced current in the closed loop circuit

Superconducting Joint and Persistent Current Switch for a 7-T Animal MRI Magnet

A pulsed current set-up for use in magnetic fields above 30 T; application to high-temperature superconductors