Abstract:Continuous carbon fiber reinforced lithium aluminosilicate glass ceramics matrix composites (C-f/LAS composites) are joined to Ti60 alloy vacuum brazed using Ti-Zr-Ni-Cu brazing alloy. The effects of the brazing temperature on the interfacial microstructure and mechanical properties of brazed joints are investigated in details. The interfacial microstructure varies apparently with an increase of the brazing temperature. The thicknesses of the banded Ti solid solution (Ti(s, s)) and the reactive layer between C-f/LAS composites and the interlayer grow gradually. The mechanical properties of brazed joints increase firstly and then decrease with an increasing temperature. In addition, a joint that is brazed at 980 degrees C for 10 min shows the highest shear strength of similar to 38.13 MPa. At the same time, the fracture paths of brazed joints also change as the temperature increases. When the brazing temperature is 950 degrees C, the fracture position is in the TiC + ZrC + Ti2O + ZrSi2 + Ti5Si3 layer on the composite side. When the brazing temperature is 980 degrees C, the fracture position is on the side of the braze seam (Ti, Zr)(2)(Ni, Cu), Ti2O + ZrSi2 + Ti5Si3 layer, and carbon fiber in the composite material. When the brazing temperature is 990 degrees C, the fracture position is in the Ti2O + ZrSi2 + Ti5Si3 layer on the composite side and the carbon fiber in the composite material. (C) 2018 Chinese Society of Aeronautics and Astronautics. Production and hosting by Elsevier Ltd.

Microstructures and Mechanical Properties of Cf/LAS Composite and Ti60 Alloy Joints Brazed with TiZrNiCu + Cf Mixed Powders

Joints of Continuous Carbon Fiber Reinforced Lithium Aluminosilicate Glass Ceramics Matrix Composites to Ti60 Alloy Brazed Using Ti-Zr-Ni-Cu Active Alloy

Microstructure and mechanical properties of Cf/Al-TiAl laser-assisted brazed joint

Effect of Processing Parameters on the Formation of C-F/Las Composites/Ag-Cu-Ti/Tc4 Brazed Joint

Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2-Ni-B brazing powder

Microstructure and Mechanical Properties of C/C Composite/ti6al4v Joints with a Cu/TiCuZrNi Composite Brazing Alloy

Effect of Brazing Parameters on Microstructure and Mechanical Properties of Cf/SiC and Nb-1Zr Joints Brazed with Ti-Co-Nb Filler Alloy

Brazing continuous carbon fiber reinforced Li 2 O–Al 2 O 3 –SiO 2 ceramic matrix composites to Ti–6Al–4V alloy using Ag–Cu–Ti active filler metal

Interfacial Microstructure and Mechanical Properties of the Vacuum Brazed C/SiC Composite and Nb Joints

Strengthening the ZrC-SiC Ceramic and TC4 Alloy Brazed Joint Using Laser Additive Manufactured Functionally Graded Material Layers

Brazing of C/C Composite and TiAl Alloy Using TiNiSi Filler Metal Added Cu Interlayer

Microstructure and properties of different carbon fiber reinforced ceramic composites brazed joint by Si-Ti alloy filler

The preparation and mechanical properties of carbon–carbon/lithium–aluminum–silicate composite joints

Microstructure and Formation Mechanism of Cf/SiC and Nb Joint Brazed with Laminated Amorphous Ti–Zr–Cu–Ni/crystalline Ti Composite Filler

Microstructure and Shear Strength of SiC Joint Brazed with LiAlSiO4 Reinforced AgCuTi Composite Filler

Microstructure Evolution and Mechanical Property of ZrC-SiC/Ti6Al4V Joints Brazed Using Ti-15Cu-15Ni Filler

Microstructure and properties of the C/C-superalloy brazed joint by Ni-based filler

Microstructure and mechanical properties of C/C composite joint brazed with Ni-based filler

Interfacial Microstructure and Mechanical Property of ZrC-SiC Ceramic and Ti6Al4V Joint Brazed with AgCuTi Alloy

Pre-infiltration and brazing behaviors of Cf/C composites with high temperature Ti Si eutectic alloy

A Novel Method for Reducing the Brazing Temperature of C/C Composite with TiZrHfTa/Ni Composite Interlayers