Abstract:Abstract Silicon wet bulk micromachining is the most widely used technique for the fabrication of diverse microstructures such as cantilevers, cavities, etc. in laboratory as well as in industry for micro-electromechanical system (MEMS) application. Although, increasing the throughput remains inevitable, and can be done by increasing the etching rate. Furthermore, freestanding structure release time can be reduced by the improved undercutting rate at convex corners. In this work, we have investigated the etching characteristics of a non-conventional etchant in the form of hydroxylamine (NH 2 OH) added sodium hydroxide (NaOH) solution. This research is focused on Si{100} wafer as this orientation is largely used in the fabrication of planer devices (e.g., complementary metal-oxide semiconductors) and microelectromechanical systems (e.g., inertial sensors). We have performed a systematic and parametric analysis without and with 12% NH 2 OH in 10 M NaOH for improved etching characteristics such as etch rate, undercutting at convex corners, and etched surface morphology. 3D scanning laser microscope is used to measure average surface roughness ( R a ), etch depth (d), and undercutting length ( l ). Morphology of the etched Si{100} surface is examined using optical and scanning electron microscopes. The addition of NH 2 OH in NaOH solution remarkably exhibited a two-fold increment in the etching rate of a Si{100} surface. Furthermore, the addition of NH 2 OH significantly improves the etched surface morphology and undercutting at convex corners. Undercutting at convex corners is highly prudent for the quick release of microstructures from the substrate. In addition, we have studied the effect of etchant age on etching characteristics. Results presented in this article are of large significance for engineering applications in both academic and industrial laboratories.

A High-Selectivity HNA Etching System for Bulk Micromachined Deep Holes with High Roundness

Fabrication of Buried Microchannels with Almost Circular Cross-Section Using HNA Wet Etching

Improved HNA Isotropic Etching for Large-Scale Highly Symmetric Toroidal Silicon Molds with < 10-Nm Roughness

Fabrication of the microfluidic channels in silicon wafers using isotropic wet etching method: the impact of the composition of HNA solution on etching

Fabrication High Aspect Ratio Nanometer Holes on the Alumina Based on Self-Organization Technology

Fabrication of High-Accuracy Micro-Holes in Micro-Edm under Tool Electrode Spiral Motion Feed Mode Combined with Fixed Reference Axial Compensation

A New Method of Laser-induced Wet Etching Used for Etch Hole's Facture on GaAs Wafer

Metal-Assisted Chemical Etching for Anisotropic Deep Trenching of GaN Array

Uniform Vertical Trench Etching on Silicon with High Aspect Ratio by Metal-Assisted Chemical Etching Using Nanoporous Catalysts.

Study on Silicon Deep Wet Etching Technology for MEMS

Machining of Metal Microcone Arrays Based on Through-Mask Electrochemical Micromachining with Circumferential Equivalent Etching

Fabrication of Polygonal Nanoholes by Localized Mask-Free Wet Anisotropic Etching

Fabrication of through holes in silicon carbide using femtosecond laser irradiation and acid etching

Improved Metal Assisted Chemical Etching Method for Uniform, Vertical and Deep Silicon Structure

Enhanced etching characteristics of Si{100} in NaOH-based two-component solution

Optimizing Hole Shape and Improving Surface Quality of Inconel 718 Alloy by High-Temperature Chemical Assisted Laser Processing

Electrochemical Machining of Micro-Pit Arrays on a GH4169 Alloy with a Roll-Print Mask Using a C6H5Na3O7-Containing NaNO3 Mixed Electrolyte

Fabrication and anti-corrosion performances of robust superhydrophobic surface on NAB via solution-etching

Electrochemical Jet Machining in Deep-Small Holes with Gas Assistance: Generating Complex Features on Internal Surfaces

Nanoprecision Measurement of High-Aspect-Ratio Microholes Using Sub-100-μm Tungsten Ball Tip

Inductively Coupled Plasma Etching of Bulk Tungsten for MEMS Applications