Abstract:This paper presents a study of the characteristic effects of the physicochemical properties of microcrystalline cellulose and a series of biocarbon samples produced from this raw material through thermal conversion at temperatures ranging from 200 °C to 850 °C. Structural studies revealed that the biocarbon samples produced from cellulose had a relatively low degree of graphitization of the carbon and an isometric shape of the carbon particles. Based on thermal investigations using the differential thermal analysis/differential scanning calorimeter method, obtaining fully formed biocarbon samples from cellulose feedstock was possible at about 400 °C. The highest direct carbon solid oxide fuel cell (DC-SOFC) performance was found for biochar samples obtained via thermal treatment at 400-600 °C. The pyrolytic gases from cellulose decomposition had a considerable impact on the achieved current density and power density of the DC-SOFCs supplied by pure cellulose samples or biochars derived from cellulose feedstock at a lower temperature range of 200-400 °C. For the DC-SOFCs supplied by biochars synthesised at higher temperatures of 600-850 °C, the "shuttle delivery mechanism" had a substantial effect. The impact of the carbon oxide concentration in the anode or carbon bed was important for the performance of the DC-SOFCs. Carbon oxide oxidised at the anode to form carbon dioxide, which interacted with the carbon bed to form more carbon oxide. The application of biochar obtained from cellulose alone without an additional catalyst led to moderate electrochemical power output from the DC-SOFCs. The results show that catalysts for the reverse Boudouard reactions occurring in a biocarbon bed are critical to ensuring high performance and stable operation under electrical load, which is crucial for DC-SOFC development.

Effects of Discharge Mode and Fuel Treating Temperature on the Fuel Utilization of Direct Carbon Solid Oxide Fuel Cell

Characterization of Symmetrical SrFe0.75Mo0.25O3−δ Electrodes in Direct Carbon Solid Oxide Fuel Cells

Highly efficient direct carbon solid oxide fuel cells operated with camellia oleifera biomass

The Thermal Effect in Direct Carbon Solid Oxide Fuel Cells

Investigating the Effects of the Physicochemical Properties of Cellulose-Derived Biocarbon on Direct Carbon Solid Oxide Fuel Cell Performance

High-performance and Stable La0.8Sr0.2Fe0.9Nb0.1O3-δanode for Direct Carbon Solid Oxide Fuel Cells Fueled by Activated Carbon and Corn Straw Derived Carbon

Thermal Effects in H2O and CO2 Assisted Direct Carbon Solid Oxide Fuel Cells

In-situ catalytic gasification of kelp-derived biochar as a fuel for direct carbon solid oxide fuel cells

Sulfur-tolerant Fe-doped La0·3Sr0·7TiO3 perovskite as anode of direct carbon solid oxide fuel cells

The physical properties and effects of sintering conditions on rSOFC fuel electrodes evaluated by molecular dynamics simulation

Highly efficient utilization of crop straw-derived biochars in direct carbon solid oxide fuel cells for electricity generation

Biomass Carbon Fueled Tubular Solid Oxide Fuel Cells with Molten Antimony Anode

Experimental and Modeling Study of High Performance Direct Carbon Solid Oxide Fuel Cell with in Situ Catalytic Steam-Carbon Gasification Reaction

Using Potassium Catalytic Gasification to Improve the Performance of Solid Oxide Direct Carbon Fuel Cells: Experimental Characterization and Elementary Reaction Modeling

Electrochemical Characteristics and Carbon Tolerance of Solid Oxide Fuel Cells with Direct Internal Dry Reforming of Methane

Research and Development of Solid Oxide Direct Carbon Fuel Cell

Review—Bibliometrics and Current Research Trends on Direct Carbon-Solid Oxide Fuel Cells Utilizing Biomass as Fuel

Modeling of Direct Carbon Solid Oxide Fuel Cell for CO and Electricity Cogeneration

Construction of a Transient Multi-Physics Model of Solid Oxide Fuel Cell Fed by Biomass Syngas Considering the Carbon Deposition and Temperature Effect

Degradation mechanisms and mitigation strategies of direct methane solid oxide fuel cells

Modeling of Direct Carbon Solid Oxide Fuel Cells with H2o and Co2 As Gasification Agents