Abstract:This paper describes a multi-FPGA based platform for emulating the Loongson-2G micro-processor on different mother boards. This platform is developed targeting at verification and evaluation of the Loongson-2G micro-processor, which is the next generation of Loongson-2 family, composed by one four-issue, out-of-order execution way 64-bit MIPS-compatible processor core named GS464, one 1M byte secondary Cache, one HyperTransport IO interface, one DDR2/3 memory interface and some other low speed IO interfaces. Most parts of this micro-process are mapped into the multi-FPGA based platform which consists two Vertex-5 330 FPGA chips. Semi-custom partitioning tactics within the entire design flow are developed to synthesize the whole designed into the multi-FPGA based platform. Modifications in architectural level are applied to the original architecture of the chip, in order to make it easy to be partitioned into two parts. High speed SEDES of HyperTransport IO link and DDR2/3 memory interface are emulated by using several clocks with different clock phases. To resolve the problem that hard to debug in FPGA system, a method by software probe with help of injected hardware modules in FPGA is developed and used to debug the problem causing by behavior mismatching between the ASIC ram block and the FPGA ram block. Some evaluation work on performance of Loongson-2G is done on this multi-FPGA based platform as pre-silicon test. To the authors' knowledge, there has been no previous work on such a big design used for verification and evaluation.

A Standalone FPGA-test Platform with Bi-directional Ports Supported

An Easily Reconfigurable Simulation Environment on FPGA Based Platform

Design and FPGA Verification of a Novel Reliable Real-Time Data Transfer System

Romote Test System of FPGA based on USB and LVDS

Design and development of a computer interface experimental platform bawd on advanced FPGA

Design for HW/SW Co-Testing Based on FPGA

Data Path Design of FPGA-based HW/SW Co-simulation Platform

A Deep Research on the Chip Verification Platform Based on Network

Design of Intelligent Signal Generator Board Based on FPGA

FPGA based low-cost Portable Tester with On-Board Supplies

Design and Implementation of 1553B Bus System Based on FPGA

Design Multi-core System Using Microblaze and Realize on the FPGA

Designs of a modular general test platform

An Automated Test Framework for SRAM-based FPGA

The Implementation of Xilinx FPGAs’ Interconnection Module

A Hardware-Software Co-Design Experiments Platform for NAND Flash Based on Zynq

An Intelligent Interface Design Method Based on Dsp and Fpga

A multi-FPGA based platform for emulating a 100m-transistor-scale processor with high-speed peripherals (abstract only)

Design of Chip Verification Platform Based on Network

A novel FPGA manufacture-oriented interconnect fault test

Design of FPGA auto-configuration system