Abstract:Data acquisition systems are required to condition the low-level analog signals from various sensors and to convert them into digital format in order to facilitate downstream processing. Distributed DAQ systems are commonly used in SONAR systems, as a large number of acoustic sensors are used in big platforms and the sensors are physically distributed. The data collected by the distributed DAQ systems are transmitted to a central processing system in real-time where further processing of the data is done. The operating environment of the underwater system can impose severe restrictions on the design of the DAQ system. This paper presents a hardware-software co-design based approach to implementing a resource-efficient FPGA-based distributed DAQ system. Here, the functionality of deterministic data transmission through Ethernet is implemented using RTL modules, and remote health monitoring and configuration control functionalities with TCP/IP stack support are implemented in a soft-processor inside FPGA. To reduce the number of external cables and the FPGA resource utilization, a single Ethernet MAC is shared between processor and RTL modules using AXI switches. Synchronized sampling of sensors is an important requirement in distributed DAQ systems. In this paper, synchronization is achieved by implementing the IEEE1588 precision time protocol in FPGA. By implementing the timestamping of the PTP messages at the RGMII interface, synchronization accuracy close to 300ns was achieved. The implementation was done on Artix7 FPGA from Xilinx with a resource utilization of 36K LUTs and 43K flip-flops. MicroBlaze soft-processor was used with 100 MHz clock and the Synchronization Timer was generated using a 200 MHz clock.

Design and FPGA Verification of a Novel Reliable Real-Time Data Transfer System

Real-time scheduling scheme for EPA networks

Research on Fast Real-time Ethernet for Plant Automation

Study and realization of EPA communication schedule algorithm based on parallel processing

EPA-based Open Network Control System

Improving the Real-Time Performance of Ethernet for Plant Automation (EPA) Based Industrial Networks

Design and Implementation of FPGA Based High-Speed Bus for Control System

High speed video signal acquisition and processing system based on FPGA technique

The Design of a High Speed and Reliable Data Center Based on FPGA

Hardware-based Solution of Precise Time Synchronization for Networked Control System

A study of UDP and TCP FPGA implementation for data acquisition system

Design and implementation of a data acquisition system based on FPGA and Ethernet

Romote Test System of FPGA based on USB and LVDS

Design of Multi-serial Communication for Flight Controlling Computer Based on FPGA

A New Design for Precision Clock Synchronization Based on FPGA

FABLE-DTS: Hardware-Software Co-Design of a Fast and Stable Data Transmission System for FPGAs

A Hardware-Software Co-design based Approach for Development of a Distributed DAQ System using FPGA

Design and Implementation of High-Speed Data Transmission Scheme Between FPGA Boards Based on Virtex ‐7 Series

Deterministic and Real-Time Communication over Ethernet in EPA Control System

The Implementation of IEEE 1588 Clock Synchronization Protocol Based on FPGA.

A Flexible FPGA-to-FPGA Communication System