Abstract:High diffraction signal-to-background ratios (SBRs), the ratio of diffraction peak integrated intensity over its background intensity, are desirable for a neutron diffractometer to acquire good statistics for diffraction pattern measurements and subsequent data analysis. For a given detector, while the diffraction peak signals primarily depend on the characteristics of the neutron beam and sample coherent scattering, the background largely originates from the sample incoherent scattering and the scattering from the instrument space. In this work, we investigated the effect of collimation on neutron diffraction SBRs of Si powder measurements using one high-angle area detector bank coupled with six different collimation configurations in a large and complex instrument space at the engineering materials diffractometer VULCAN, SNS, ORNL. The results revealed that the diffraction SBRs can be significantly improved by a proper coarse collimator that leaves no gap between the detector and the collimator, and the improvement of SBRs by a fine radial collimator was remarkable with a proper coarse collimator in place but not distinguishable without one. It was also found that the diffraction SBRs were not effectively improved by adding the neutron-absorbing element boron to the fine radial collimator body, which indicates that either the absorption of secondary scattered neutrons by the added boron is insignificant or the collimator base material (resin and ABS) alone attenuates background scattering sufficiently. These findings could serve as a useful reference for diffractometer developers and/or operators to optimize their collimation to achieve higher diffraction SBRs.

The Research on the Suppression of Spurious Neutrons for A Neutron Detector Array That May Be Used in the Neutron Scattering

Suppression of Spurious Neutrons for the Neutron Detector Used in Small Angle Neutron Scattering

An Angular Sensitivity Study of the Boron-Lined Honeycomb Convertor Neutron Detector Used for the Small Angle Neutron Scattering

Research on a Neutron Detector With a Boron-Lined Honeycomb Neutron Converter

The Research Of High Detection Efficiency Boron Lined Detector With A Honeycomb Neutron Converter

Study of boron-lined straw-tube detector array for neutron scattering measurement

The Study of Boron-Lined Honeycomb Neutron Detector with a Multi-Wire Proportional Chamber Readout

Study of uniform drift electric field used for boron-lined honeycomb neutron detector

The Research on the Effect of Boron Layer Roughness for the Detection Efficiency of Boronlined Gaseous Neutron Detector

Suppression of intrinsic neutron background in the Multi-Grid detector

Neutron imaging and spatial resolution evaluation of the boron-lined honeycomb neutron converter based detector

Study of Boron Coated Straw Detectors for Small Angle Neutron Scattering on Cphs

Boron-10 layers, Neutron Reflectometry and Thermal Neutron Gaseous Detectors

Method for stabilizing the detection efficiency of grazing angle incidence boron-lined neutron detectors

Using Back-Scattering to Enhance Efficiency in Neutron Detectors

Effect of Collimation on Diffraction Signal-to-Background Ratios at a Neutron Diffractometer

Study on structural and material dependence of Rhodium Self-powered Neutron Detector performance

Research of boron lined honey-neutron detector realized with atomic layer deposition

Experimental study of boron-coated straws with a neutron source

Radiogenic neutron background in reactor neutrino experiments

A large area, high counting rate micromegas-based neutron detector for BNCT