Abstract:One of the key requirements for neutron scattering instruments is the Signal-to-Background ratio (SBR). This is as well a design driving requirement for many instruments at the European Spallation Source (ESS), which aspires to be the brightest neutron source of the world. The SBR can be effectively improved with background reduction. The Multi-Grid, a large-area thermal neutron detector with a solid boron carbide converter, is a novel solution for chopper spectrometers. This detector will be installed for the three prospective chopper spectrometers at the ESS. As the Multi-Grid detector is a large area detector with a complex structure, its intrinsic background and its suppression via advanced shielding design should be investigated in its complexity, as it cannot be naively calculated. The intrinsic scattered neutron background and its effect on the SBR is determined via a detailed Monte Carlo simulation for the Multi-Grid detector module, designed for the CSPEC instrument at the ESS. The impact of the detector vessel and the neutron entrance window on scattering is determined, revealing the importance of an optimised internal detector shielding. The background-reducing capacity of common shielding geometries, like side-shielding and end-shielding is determined by using perfect absorber as shielding material, and common shielding materials, like B$_{4}$C and Cd are also tested. On the basis of the comparison of the effectiveness of the different shielding topologies and materials, recommendations are given for a combined shielding of the Multi-Grid detector module, optimised for increased SBR.

Using Back-Scattering to Enhance Efficiency in Neutron Detectors

Scattered neutron background in thermal neutron detectors

Investigation of neutron scattering in the Multi-Blade detector with Geant4 simulations

Single-Volume Neutron Scatter Camera for High-Efficiency Neutron Imaging and Spectroscopy

The Research on the Suppression of Spurious Neutrons for A Neutron Detector Array That May Be Used in the Neutron Scattering

New perspectives for neutron imaging through advanced event-mode data acquisition

Boron-10 layers, Neutron Reflectometry and Thermal Neutron Gaseous Detectors

Suppression of intrinsic neutron background in the Multi-Grid detector

New Measurements and Quantitative Analysis of Electron Backscattering in the Energy Range of Neutron Beta-Decay

A feasibility study using an array of LaBr3(Ce) scintillation detectors as a Compton camera for prompt gamma imaging during BNCT

Experiment and Monte Carlo simulation of gamma-ray backscattering from materials for nondestructive testing

Simulation Study of the Backward-Scattering Effect in Compton Imager

A New Neutron Detector Designed for (n,2n) and (n,3n) Reaction Cross Section Measurements

Study Of A Nthgem-Based Thermal Neutron Detector

Boron-10 lined RPCs for sub-millimeter resolution thermal neutron detectors: Conceptual design and performance considerations

The role of stopping layer and conversion structure on fast neutron imaging

The Study of Boron-Lined Honeycomb Neutron Detector with a Multi-Wire Proportional Chamber Readout

Study of boron-lined straw-tube detector array for neutron scattering measurement

Neutron reflectometry on highly absorbing films and its application to 10B4C-based neutron detectors

Probing the Earth's interior with a large-volume liquid scintillator detector

Simulation of Large-Scale Fast Neutron Liquid Scintillation Detector