Abstract:The interface structure and infiltration effect between reinforcement (CFs) and Al matrix have a significant impact upon comprehensive properties of the resulting carbon-fibre-reinforced Al matrix (CF/Al) composites. In present study, Ni coatings with different thicknesses were evenly coated onto carbon fibres (CFs) via electroplating for the purpose of promote the interface combining effect and reduce adverse interfacial reaction betwixt CFs and Al matrix. The influence of pH value (2, 3, 4, 5, 6), current density (0.1 A, 0.2 A, 0.3 A, 0.4 A, 0.5 A, 0.6 A), electroplating time (2 min, 4 min, 6 min) on surface appearance and tensile strength of Ni-coated CFs were discussed. The results show that the Ni-coated CFs with excellent integrity and mechanical properties was obtained at a current density of 0.4 A and a pH of 5. Subsequently, twin-roll casting and T6 heat treatment process were used to fabricate CF/Al composites with varying Ni coating thicknesses. Using SEM, TEM and tensile property testing, the impact of Ni coating thickness (0 μm, 0.35 μm, 0.58 μm, 0.76 μm) on interfacial microstructures and mechanical characteristics of CF/Al composites were examined. The results exhibit that the 0.76 μm Ni-coated CF/Al composites exhibit best UTS and elongation of 151.6 MPa and 11.7 %, respectively. This is due to a thicker Ni coating preventing the CFs against reaction with Al matrix during processing the composites, which reduces the generation of Al 4 C 3 phase. However, when the coating thickness is 0.35 μm, adverse chemical interactions occur at interface of Al-CFs, leading to the formation of an Al 4 C 3 phase. Finally, the strengthening mechanism of Ni-coated CF/Al composites was analyzed, and its strengthening model was established. This study can provide a pratical route to prepare and applicate the high-quality continuous CF/Al composites.

Electroless Carbon Fibers: A New Route for Improving Mechanical Property and Wettability of Composites

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Enhancement of Fiber–matrix Adhesion in Carbon Fiber Reinforced Al-matrix Composites with an Optimized Electroless Plating Process

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

Effect of surface modification on interfacial microstructures and mechanical properties of continuous CF/Al composites

Preparation and Characterization of Nickel-Coated Carbon Fibers by Electroplating

Morphology And Performance Of Electroless Composite Plating Ni-P-Sic Coating On Surface Of Carbon Fiber

Fe–Ni Alloy Coatings on Carbon Fiber Reinforced Carbon Matrix Composite with an Enhanced Interface Prepared Through Ultrasound-Assisted Electrodeposition

MXene modified carbon fiber composites with improved mechanical properties based on electrophoretic deposition

Experimental Study on Properties of Ni-P-Cf Electroless Composite Coating

Interfacially Reinforced Carbon Fiber Silicone Resin Via Constructing Functional Nano-Structural Silver

The effect of nickel coating on the mechanical properties and failure modes of continuous carbon fiber reinforced aluminum matrix composites

Electroless Nickel Plating and Spontaneous Infiltration Behavior of Woven Carbon Fibers

Effect of Cu/Ni Coating on the Interface and Mechanical Properties of Cf/2024Al Composites

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Electrostatic Incitation on Fiber Surface for Enhancing Mechanical Properties of Fiber-Reinforced Composite

Electroless nickel plating on the surface of carbon fibers

Preparation of Silver-Plated Carbon Nanotubes/carbon Fiber Hybrid Fibers by Combining Freeze-Drying Deposition with a Sizing Process to Enhance the Mechanical Properties of Carbon Fiber Composites

Influence of Carbon Nanotubes Coatings Onto Carbon Fiber by Oxidative Treatments Combined with Electrophoretic Deposition on Interfacial Properties of Carbon Fiber Composite

Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel