Abstract:Nickel-based superalloys, especially single-crystal (SC) ones, have long been recognized as important materials for turbine blades used in aerospace and gas engines. Static magnetic fields are effective at controlling the material forming. The use of static magnetic fields during solidification has evolved as a sophisticated approach for efficiently controlling the microstructures and mechanical performance of metallic materials. In recent years, studies have shown that static magnetic fields have a complex effect on dendrites in SC superalloys. However, the mechanism of static magnetic fields regulating stray grains on remelted interface needs to be investigated further. This work studied the generation of stray grains near the seed remelted zone and the evolution mechanism during the directional solidification of the SC superalloy assisted by a magnetic field by tracing the solidification microstructure. The stray grains of large orientation that deviated from the <001> direction appeared on the remelted zone interface of the solidification microstructure when the magnetic field was applied, accompanied by the formation of a large-angle grain boundary (LAGB). Most of the stray grains were distributed at the sample edge. The increase in magnetic field intensity and pulling speed increased the number of stray grains and the length of the LAGB. As the solidification progressed, the large-orientation stray grains and the LAGBs were eliminated at a fast speed and evolved into small-orientation dendrites. During the following solidification, the orientation of the dendrites became even smaller and the evolution speed decreased sharply. The increase in withdrawal speed intensified the evolution process. The stray grains formed in the remelted zone can be attributed to the twisting dendrite by the thermoelectric magnetic force. The distribution of more stray grains around the sample was caused by the circulation from thermoelectric magnetic convection at the macroscopic scale.

Formation of Low-Angle Grain Boundaries under Different Solidification Conditions in the Rejoined Platforms of Ni-based Single Crystal Superalloys

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Dendrite deformation in the rejoined platforms of Ni‐based single crystal superalloys

Understanding the Formation and Evolution of Low-Angle Grain Boundaries in Nickel-Based Single Crystal Superalloys

Thermal-solutal Convection-Induced Low-Angle Grain Boundaries in Single-Crystal Nickel-Based Superalloy Solidification

Stray Grain Formation in Casting Platform of Third Generation Ni-Base Single Crystal Superalloy

Investigation of Grain Competitive Growth During Directional Solidification of Single-Crystal Nickel-Based Superalloys

Competitive Grain Growth Mechanism in Three Dimensions During Directional Solidification of A Nickel-Based Superalloy

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Grain Orientation Optimization Of Two-Dimensional Grain Selector During Directional Solidification Of Ni-Based Superalloys

Microstructure and Microsegregation in A Ni-Based Single Crystal Superalloy Directionally Solidified under High Thermal Gradient

Microstructure Development of Different Orientated Nickel-Base Single Crystal Superalloy in Directional Solidification

Formation of Stray Grains During Directional Solidification of a Superalloy AM3

Analysis of competitive growth mechanism of stray grains of single crystal superalloys during directional solidification process

The Effects of Withdrawal and Melt Overheating Histories on the Microstructure of a Nickel-Based Single Crystal Superalloy

Epitaxy and New Stray Grain Formation Mechanism During Epitaxial Laser Melting Deposition of Inconel 718 on Directionally Solidified Nickel-Based Superalloys

Effect of dendrite arrays near grain boundary on the competitive growth of converging Ni-based bi-crystal superalloys

Microstructural Evolution with a Wide Range of Solidification Cooling Rates in a Ni-Based Superalloy

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

Formation and Evolution of Stray Grains on Remelted Interface in the Seed Crystal During the Directional Solidification of Single-Crystal Superalloys Assisted by Vertical Static Magnetic Field