Abstract:Directional solidification of A1-4.5Cu alloy refined by adding Al-5Ti-1B has been carried out to investigate the texture formation and grain boundary characteristic of the paramagnetic crystal under a high magnetic field. OM and EBSD were applied to analyze the microstructures solidified at different temperature gradients (G) and magnetic field intensities (B). The results show that at the temperature gradient of 27 K/cm; the orientations of fcc alpha-Al grains without magnetic field are random. However, as a high magnetic field is imposed, the easy magnetization axes < 310 > of the alpha-Al grains are aligned parallel to the direction of the magnetic field leading to < 310 > texture. Meanwhile, the ratio of coincidence site lattice (CSL) grain boundaries increases with the increment of magnetic field intensity and reaches its maximum value at 4 T, but decreases as the magnetic field enhances further. On the other hand, when the temperature gradient is elevated, columnar dendrite morphology is exhibited without magnetic field; while a 6 T high magnetic field is introduced, the columnar dendrites are broken and equiaxed grains of random orientations are obtained. The alignment behavior of the free crystals in melt could be attributed to the magnetic crystalline anisotropy of alpha-Al. Moreover, the influence of fluid flow on the texture formation and CSL grain boundary development under magnetic field is discussed. The absence of convection is benefit for grain reorientation and CSL boundary formation. The application of high static magnetic field will inhibit the macro-scale convection. However, the interaction between thermoelectric current and magnetic field will cause micro-scale fluid flow, i.e., thermoelectric magnetic convection (TEMC). The TEMC will give rise to perturbation near the solid-liquid interface leading to the appearance of freckles as well as the decreasing of the ratio of CSL boundary. Moreover, it is proposed that the formation of CSL boundary is associated with the rotation of the free grains in melt along specific crystallographic axes by magnetic torque.

Formation and Evolution of Stray Grains on Remelted Interface in the Seed Crystal During the Directional Solidification of Single-Crystal Superalloys Assisted by Vertical Static Magnetic Field

Formation Mechanism of Stray Grain of Nickel-Based Single-Crystal Superalloy Under a High Magnetic Field During Directional Solidification

Optimization of Grain-Selection Behavior in the Spiral Selector During Cusp-Magnetic-Field-Assisted Directional Solidification of Single-Crystal Superalloy

Effect of Horizontal Magnetic Field on the Microstructure of Directionally Solidified Ni-Based Superalloy

High-Magnetic-Field-Induced Formation of Aligned Equiaxed Grains During Directional Solidification

Microscale Stray Grains Formation in Single-Crystal Turbine Blades of Ni-based Superalloys

The Formation Mechanism, Influencing Factors and Processing Control of Stray Grains in Nickel-Based Single Crystal Superalloys

The Microstructure Characteristic and Its Influence on the Stray Grains of Nickel-based Single Crystal Superalloys Prepared by Laser Directed Energy Deposition

Effect of Magnetic Field Configuration on Stray-Crystal Formation with Different Platform Sizes during Directional Solidification of Single-Crystal Superalloy

Analysis of competitive growth mechanism of stray grains of single crystal superalloys during directional solidification process

The Stray Grains from Fragments in the Rejoined Platforms of Ni-Based Single-Crystal Superalloy

On the Formation of Gradient-Distributed Dendrites in a Single Crystal Nickel-Based Superalloy Directionally Solidified under Transverse Static Magnetic Field

Formation of Stray Grains During Directional Solidification of a Superalloy AM3

Texture Formation and Grain Boundary Characteristic of A1-4.5cu Alloys Directionally Solidified under High Magnetic Field

Study on the formation and competitive growth mechanism of stray grains during spiral grain selector of nickel-based single crystal superalloy

Constitutional supercooling and corresponding microstructure transition triggered by high magnetic field gradient during directional solidification of Al-Fe eutectic alloy

Stray grain formation associated with constitutional supercooling during plasma re-melting of Ni-based single crystal superalloy based on temperature field simulation and actual substrate orientation

Evolution of microstructure and microsegregation in Ni-Mn-Ga alloys directionally solidified under axial magnetic field

In-situ Fabrication of Graded Material with the Application of a Horizontal Magnetic Field During Directional Solidification

Effect of Electromagnetic Field on Microstructure of Ni-Based Single Crystal Superalloys

Effect of a transverse magnetic field on the growth of equiaxed grains during directional solidification