Abstract:The relevant phase transformations induced by atomic diffusion at the vicinity of Nb/TiAl heterogenous interface were systematically investigated by establishing a novel system of TiAl-Nb couple via metallurgical bonding of Nb block and γ-TiAl powders by hot pressing sintering and post-annealing treatments. As a result, the resultant diffusion layer, acting as adhesive region linking the Nb and TiAl substrates, thickened with the increase of annealing temperature and the prolongation of holding time, which could be well described by the developed power function. A series of intermediate phases initially nucleated at the Nb/TiAl interface and grew toward both substrates, which was the result of the exchange, partitioning and recombination of solute atoms in the light of vacancy-mediated substitutional diffusion pattern. The phase transformation path on the Nb side was β→η→η + σ→σ→β 0 →β 0 + γ n , while that on the TiAl side was γ→γ ss →γ ss + α→(γ + α)+ (α + β 0 )→α + β 0 →β 0 + γ n . Then the disorder-order transition of α→α 2 and β 0 →B2 occurred during cooling. The progress of phase transformation slowed down as the diffusion proceeded, which was attributed to the decrease in atomic substitution efficiency due to the reduction of atomic concentration gradient and the extension of migration distance. In such a case, the banded σ ba split into spike σ sp along the direction of maximum concentration gradient, and then shrunk to isolated σ is until completely dissolved in β 0 regime, principally dominated by Ti occupying Nb sublattices. The lenticular γ n existed mainly in the form of twins, resulting from the lattice reconstruction in accordance with the orientation relationship of 111γ//110β0 and 1̅10γ//11̅1β0 in the Al partitioning region during the spontaneous fluctuation of atomic concentration of β 0 regime. These findings filled some fundamental gaps with respect to TiAl-Nb diffusion reaction system, and afforded profound insights into the development of high-performance TiAl/Nb composites with tailorable microstructure.

Experimental Evidence of Precipitation of All 12 Variants in a Single Β Grain in Titanium Alloys

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

The precipitation mechanism of secondary α-phase and formation of a bimodal microstructure in Ti6242S alloy cooled from the α + β phase field

Effect of Cooling Rate on α Variant Selection and Microstructure Evolution in TB17 Titanium Alloy

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

Variant selection during α precipitation in Ti–6Al–4V under the influence of local stress – A simulation study

Growth behavior and variant selection of grain boundary α in Ti6246

The α2 precipitation from equiaxed γ phase in as-cast Ti-44Al-4Nb-2Cr-0.1B alloy

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

Origin of Morphological Variation of Grain Boundary Precipitates in Titanium Alloys

Effect of cooling rate on α variant selection and microstructure evolution in a near β Ti–5Al–3Mo–3V–2Cr–2Zr–1Nb–1Fe alloy

Atomic diffusion and microstructural evolution at the Nb/TiAl heterogenous interfaces during annealing at elevated temperatures

Effect of β recrystallization on the precipitation evolution of primary α phase and the phase transformation inheritance during thermomechanical processing in Ti-55511 alloy

Precipitation behaviors and orientation evolution mechanisms of α phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation

Mechanisms of grain boundary α precipitation in the metastable β-Titanium Ti-5Al-5Mo-5V-3Cr

Using transmission Kikuchi diffraction to characterise α variants in an α + β titanium alloy

α′′ phase-assisted nucleation to obtain ultrafine α precipitates for designing high-strength near-β titanium alloys

TiB whisker induced variant selection in titanium matrix composites

Morphology evolution and orientation characteristics of precipitate of ultra-high strength titanium alloy

Variant selection of orthorhombic phase precipitation and its effect on colony side plates formation in Ti–22Al–25Nb alloy

Variant selection of massive γ subgrains and corresponding mechanical properties in Ta containing γ-TiAl-based alloys