Abstract:The growing use of thermoplastic composites (TPCs) like low-melting polyaryletherketone (LM-PAEK) matrices reinforced with unidirectional carbon fiber (CF) in aircraft structures presents a significant challenge in terms of lightning strikes and electromagnetic interference shielding during aircraft operations. This is due to the weak electrical conductivity of TPC structures, which results in widespread damage when struck by lightning. The repair and maintenance of these extended damaged sites can increase operational costs and loss of flights. Several lightning strike protection (LSP) systems have been developed and implemented to address these concerns. This study evaluated a highly conductive coating with a low filler rate for its effectiveness as an LSP solution for TPCs on exterior aircraft surfaces. The TPC panel without any coatings was first studied. Subsequently, the level of conductivity was increased by incorporating the nanoscale conductive fillers, silver-coated copper (Ag/Cu) nanoflakes, with a silver content of 20 wt.% (Ag20/Cu) and 30 wt.% (Ag30/Cu), correspondingly, into the coating at two loadings of 55 wt.% and 70 wt.% in an epoxy carrier for the surface coatings. The behavior of electrical and surface conductivity was thoroughly examined to understand the impact of Ag/Cu with a high aspect ratio and the effectiveness of the LSP solution. In addition, the spray-coated TPC panels underwent rigorous Zone 2A lightning strike testing using simulated lightning current, in agreement with the industry standard of Society of Automotive Engineers (SAE) Aerospace Recommended Practice (ARP) 5412B. Despite the higher resistance due to the lower conductive coating weight, the TPC panels with Ag30/Cu at loading of 70 wt.% achieved better results than those with Ag30/Cu at loading of 55 wt.%. This is evidenced by the minor structural delamination and CF breakage on the front surface, which proposes a new economic route for a sustainable post-processed LSP system in the aviation industry.

Sesame-cookie Topography Silver Nanoparticles Modified Carbon Nanotube Paper for Enhancing Lightning Strike Protection

Fabrication of the Silver Modified Carbon Nanotube Film/carbon Fiber Reinforced Polymer Composite for the Lightning Strike Protection Application

Design of a Hybrid Carbon Fibre/carbon Nanotube Composite for Enhanced Lightning Strike Resistance

Study of Carbon Nanotubes/short Carbon Fiber Nanocomposites for Lightning Strike Protection

Hybrid Nanofiller-Enhanced Carbon Fiber-Reinforced Polymer Composites (CFRP) for Lightning Strike Protection (LSP)

Advanced lightweight lightning strike protection composites based on super-aligned carbon nanotube films and thermal-resistant zirconia fibers

Emi Shielding Effectiveness of Silver Nanoparticle-Decorated Multi-Walled Carbon Nanotube Sheets

Highly conductive and durable nanocomposite hard coatings of carbon fiber reinforced thermoplastic composites against lightning strikes

A Double-Layered Composite for Lightning Strike Protection Via Conductive and Thermal Protection

Self-response multi-functional composite material base on carbon nanotube paper using deicing, flame retardancy, thermal insulation, and lightning-strike protection

Synergistic Effects of Spray-Coated Hybrid Carbon Nanoparticles for Enhanced Electrical and Thermal Surface Conductivity of CFRP Laminates

Dual conductive network of nickel‐coated carbon fiber woven fabric for indirect and direct lightning strike protection of carbon fiber reinforced polymer composites

3D Printed Nickel-Plated Carbon Fiber Mesh for Lightning Strike Protection

Simulating lightning effects on carbon fiber composite shielded with carbon nanotube sheets using numerical methods

Thermal-damage suppression of composite material by anti-lightning NCF/CIPCF film

Lightning Damage of Carbon Fiber/Epoxy Laminates with Interlayers Modified by Nickel-Coated Multi-Walled Carbon Nanotubes

Damage suppression property of matrix dispersed CNTs-CFRP composite subjected to high-intensity and long-duration lightning strike

Study on compressive performances of carbon nanotube film‐protected composite laminates after lightning strike

Fabrication of an Enriched Graphene Surface Protection of Carbon Fiber/epoxy Composites for Lightning Strike Via a Percolating-Assisted Resin Film Infusion Method

Joule Heating Synthesis of Carbon Fiber/graphene 3D Crosslinked Structure for Lightning Strike Protection and Electromagnetic Interference in Aerospace Composites

MXene Reinforced Thermosetting Composite for Lightning Strike Protection of Carbon Fiber Reinforced Polymer