Abstract:The growing use of thermoplastic composites (TPCs) like low-melting polyaryletherketone (LM-PAEK) matrices reinforced with unidirectional carbon fiber (CF) in aircraft structures presents a significant challenge in terms of lightning strikes and electromagnetic interference shielding during aircraft operations. This is due to the weak electrical conductivity of TPC structures, which results in widespread damage when struck by lightning. The repair and maintenance of these extended damaged sites can increase operational costs and loss of flights. Several lightning strike protection (LSP) systems have been developed and implemented to address these concerns. This study evaluated a highly conductive coating with a low filler rate for its effectiveness as an LSP solution for TPCs on exterior aircraft surfaces. The TPC panel without any coatings was first studied. Subsequently, the level of conductivity was increased by incorporating the nanoscale conductive fillers, silver-coated copper (Ag/Cu) nanoflakes, with a silver content of 20 wt.% (Ag20/Cu) and 30 wt.% (Ag30/Cu), correspondingly, into the coating at two loadings of 55 wt.% and 70 wt.% in an epoxy carrier for the surface coatings. The behavior of electrical and surface conductivity was thoroughly examined to understand the impact of Ag/Cu with a high aspect ratio and the effectiveness of the LSP solution. In addition, the spray-coated TPC panels underwent rigorous Zone 2A lightning strike testing using simulated lightning current, in agreement with the industry standard of Society of Automotive Engineers (SAE) Aerospace Recommended Practice (ARP) 5412B. Despite the higher resistance due to the lower conductive coating weight, the TPC panels with Ag30/Cu at loading of 70 wt.% achieved better results than those with Ag30/Cu at loading of 55 wt.%. This is evidenced by the minor structural delamination and CF breakage on the front surface, which proposes a new economic route for a sustainable post-processed LSP system in the aviation industry.

[Expression and significance of Clara cell secretory protein in injury lungs of Kunming mice after n-hexane long-term inhalation].

Design of a Hybrid Carbon Fibre/carbon Nanotube Composite for Enhanced Lightning Strike Resistance

Lightning Damage of Carbon Fiber/Epoxy Laminates with Interlayers Modified by Nickel-Coated Multi-Walled Carbon Nanotubes

Hybrid Nanofiller-Enhanced Carbon Fiber-Reinforced Polymer Composites (CFRP) for Lightning Strike Protection (LSP)

High-resolution vibrational spectroscopy of trans-formic acid in solid parahydrogen.

Damage suppression property of matrix dispersed CNTs-CFRP composite subjected to high-intensity and long-duration lightning strike

Study on compressive performances of carbon nanotube film‐protected composite laminates after lightning strike

Thermal-damage suppression of composite material by anti-lightning NCF/CIPCF film

Enhanced through-thickness electrical conductivity and lightning strike damage response of interleaved vertically aligned short carbon fiber composites

Highly conductive and durable nanocomposite hard coatings of carbon fiber reinforced thermoplastic composites against lightning strikes

Lightning strike-induced dynamic conduction characteristics and damage behavior of carbon fiber-reinforced polymer composites

Dual conductive network of nickel‐coated carbon fiber woven fabric for indirect and direct lightning strike protection of carbon fiber reinforced polymer composites

A New Electrical Resistance Measurement Method of Carbon Fiber-Reinforced Polymer Tubes Based on C⁴D Technique

Vertical z-axis discontinuous carbon fibers for improved lightning strike performance of continuous fiber-reinforced polymer composites

A Comparative Analysis of Carbon Fiber–Reinforced Polymers Subjected to Lightning Damage Tests with Conical Electrodes and Jet Diverting Electrodes

Simulated lightning strike investigation of CFRP comprising a novel polyaniline/phenol based electrically conductive resin matrix

MXene Reinforced Thermosetting Composite for Lightning Strike Protection of Carbon Fiber Reinforced Polymer

Lightning strike damage behavior of zirconium carbide and copper modified short-carbon-fiber-reinforced boron phenolic resin composites under 200 kA

Analysis of carbon fiber destruction by lighting current

Understanding lightning damage formation in a carbon-epoxy Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) composite

Characterisation of the lightning strike damage mechanics onto composite materials and discussion on its numerical modelling techniques: review