Abstract:Journal of Composite Materials, Ahead of Print. Effective lightning strike protection for critical aerospace and wind applications requires high electrical conductivity to dissipate current efficiently. However, polymer matrix composites face a challenge due to their inherently insulating nature. While conventional carbon fiber-reinforced composites (CFRP) exhibit electrical conductivity in the planar direction, achieving through-thickness conductivity remains an ongoing challenge. In this work, we have undertaken the fabrication of CFRP interleaved with vertically oriented carbon fibers (Z-fiber) to impart higher electrical conductivity along the thickness direction. Two Z-fiber composite variations are prepared: Z-1 with a single layer of Z-fiber and Z-5 with five interleaved layers and compared with no Z-fiber layer (Z-0) composite. The composite panels were subjected to lab-scale lightning strike tests with a current magnitude of 100 kA. To emulate real-world service conditions, an aerospace-grade paint coating was applied to the composite laminates. Comparative analysis shows Z-1 reduces damage diameter to ∼22 mm compared to Z-0 (∼26 mm), while Z-5 exhibits the least damage (∼16.7 mm), confirmed by optical microscopy. Z-5 demonstrates nine times higher through-thickness electrical conductivity than Z-0, reducing electrical anisotropy substantially. Thermal-electric finite element damage modeling predicts surface damage within 6% of experimental values for both Z-0 and Z-5 composites. Flexural tests post-lightning reveal Z-5 retains 66% flexural strength and 86% modulus, significantly better than Z-0, which retains less than 40% for both properties. This study highlights the efficacy of Z-fiber composites in lightning strike protection, offering improved through-thickness conductivity and mechanical property retention.

Simulated lightning strike investigation of CFRP comprising a novel polyaniline/phenol based electrically conductive resin matrix

Design of a Hybrid Carbon Fibre/carbon Nanotube Composite for Enhanced Lightning Strike Resistance

Intrinsically conductive resin as a functional repair for ECF/CFRP against simulated lighting strike: an experimental study

A New Electrical Resistance Measurement Method of Carbon Fiber-Reinforced Polymer Tubes Based on C⁴D Technique

Dynamic Electrical Characteristics of Carbon Fiber-Reinforced Polymer Composite under Low Intensity Lightning Current Impulse

MXene Reinforced Thermosetting Composite for Lightning Strike Protection of Carbon Fiber Reinforced Polymer

Lightning strike-induced dynamic conduction characteristics and damage behavior of carbon fiber-reinforced polymer composites

Development of electrically conductive structural BMI based CFRPs for lightning strike protection

Hybrid Nanofiller-Enhanced Carbon Fiber-Reinforced Polymer Composites (CFRP) for Lightning Strike Protection (LSP)

Enhancing CFRP Laminates with Plasma Jet Arrays: A Study of Interlaminar Mechanical Properties

A Novel Method for Through-Thickness Reinforcement of Laminated Composites Using Discrete Micro-Polarization-induced Fiber Injection (DMFI) Approach

Enhanced through-thickness electrical conductivity and lightning strike damage response of interleaved vertically aligned short carbon fiber composites

Vertical z-axis discontinuous carbon fibers for improved lightning strike performance of continuous fiber-reinforced polymer composites

Dynamic characteristics of carbon fiber reinforced polymer under nondestructive lightning current

Resistance Behaviour of Carbon Fibre-Reinforced Polymers Subjected to Lightning Strikes: Experimental Investigation and Application

Fabrication of the Silver Modified Carbon Nanotube Film/carbon Fiber Reinforced Polymer Composite for the Lightning Strike Protection Application

An Experimental Study of Impulse-Current-induced Mechanical Effects on Laminated Carbon Fibre-Reinforced Polymer Composites

Damage suppression property of matrix dispersed CNTs-CFRP composite subjected to high-intensity and long-duration lightning strike

Fabrication of an Enriched Graphene Surface Protection of Carbon Fiber/epoxy Composites for Lightning Strike Via a Percolating-Assisted Resin Film Infusion Method

Testing of Conductive Carbon Fiber Reinforced Polymer Composites Using Current Impulses Simulating Lightning Effects

Lightning Damage of Carbon Fiber/Epoxy Laminates with Interlayers Modified by Nickel-Coated Multi-Walled Carbon Nanotubes