Abstract:In this paper, a numerical model employing 3D foam structure represented by Weaire-Phelan foam cell is developed to study the steady heat conduction of high porosity open-cell metal foam/paraffin composite at the pore-scale level. Two conduction problems are considered in the cubic representative computation unit of the composite material: one with constant temperature difference between opposite sides of the cubic unit (that can be used to determine the effective thermal conductivity (ETC)) and the second with constant heat flux at the interface between metal foam and paraffin (that can be used to determine the interstitial conduction heat transfer coefficient (ICHTC)). The effects of foam pore structure parameters (pore size and porosity) on heat conduction are investigated for the above two problems. Results show that for the first conduction problem, the effect of foam structure on heat conduction (i.e. the ETC) is related to porosity rather than pore size. The essential reason is due to the thermal equilibrium state between metal foam and paraffin indicated by the negligible interstitial heat transfer. While for the second conduction problem with inherent thermal non-equilibrium effect, it shows that both porosity and pore size significantly influence the interstitial heat conduction (i.e. the ICHTC). Furtheimore, the present ETC and ICHTC data are compared to the results in the published literature. It shows that our ETC data agree well with the reported experimental results, and are more accurate than the numerical predications based on body-centered-cubic foam cell in literature. And our ICHTC data are in qualitative agreement with the published numerical results, but the present results are based on a more realistic foam structure.

Mechanical Model for the Interfacial Thermal Stress in Porous Ceramic Foam Coatings Bonded to a Substrate

Fracture Mechanics Analysis of Delamination Buckling of a Porous Ceramic Foam Coating from Elastic Substrates

A Multi-Scale Model for Predicting the Thermal Shock Resistance of Porous Ceramics with Temperature-Dependent Material Properties

Towards optimized pore structure to balance the thermal-mechanical performance of foamed ceramic

Effects of Microstructures of Foam Core on the Thermal Shock Strength of Ceramic Foam Sandwich Structures

Thermal Shock Resistance of Ceramic Foam Sandwich Structures: Theoretical Calculation and Finite Element Simulation

Thermal Shock Resistance Analysis of a Semi-Infinite Ceramic Foam

The Thermal Shock Resistance Analysis of Ceramic Foams

A Chemomechanical Coupling Model for Stress Analysis of Oxide Scale Growing Between Ceramic Coating and Substrate

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

An analytical model for predicting thermal residual stresses in multilayer coating systems

Interfacial Mechanics Analysis of a Brittle Coating–Ductile Substrate System Involved in Thermoelastic Contact

Finite Element Analysis of Stress Field of Thermal Barrier Coating during the Deposition Process

Thermally Induced Delamination and Buckling of a Ceramic Coating with Temperature-Dependent Material Properties from Porous Substrate at High Temperatures

Numerical Study Of Heat Conduction Of High Porosity Open-Cell Metal Foam/Paraffin Composite At Pore Scale

Modeling and simulation of mechanical-thermal-diffusional-reactional interactions in ceramic oxidation process

Analytical modelling of thermal residual stresses and optimal design of ZrO2/(ZrO2+Ni) sandwich ceramics

Thermal Shock Resistance of Porous Ceramic Foams with Temperature-Dependent Material Properties

Finite Element Simulation of Stress Distribution and Development of C-F/Sic Ceramic-Matrix Composite Coated with Single Layer Sic Coating During Thermal Shock

One Dimensional Transient Thermoelastic and Associated Fracture Analysis of Long Porous Ceramic Plate

Oral/poster reference: icf100247pr