Abstract:Two-dimensional three-point bending and four-point bending of two-layer finite element models for a ceramic layer on a metallic substrate are developed to study the damage and fracture characteristics of two-layer systems by introducing an interface cohesive zone model. The damage evolution and fracture modes of ceramic layers of different thicknesses, with loading on the metallic substrates, are compared under different loading conditions based on simulation results. Multiple surface cracks, vertical to the interface between the ceramic and metallic layers, appear in all ceramic layers under four-point bending loading and only in the thinner ceramic layers under three-point bending. For the thicker ceramic layer systems under three-point bending loading, the interface fracture between the ceramic and metallic layers is the main failure mode, agreeing with previous experimental observations. Damage and damage rate, defined by the simulated crack evolution, are found to obey a power law relation with loading and to be consistent with the theoretical predictions based on a mathematical damage model. The damage coefficient, a parameter reflecting the damage rate, is found to be size-dependent based on the simulation and experimental results, and its energy mechanism is discussed. The damage is slower for the thinner ceramic layers with a smaller damage coefficient than that for the thick ceramic layers under three-point and four-point bending loading, and the damage of the ceramic layer systems is faster under three-point bending than under four-point bending, resulted from different crack distributions, damage localization degrees, and energy dissipation. Moreover, the damage is slower for the nanostructured ceramic layers with the stronger interface strength or toughness between two layers.

Fracture Mechanics Analysis of Delamination Buckling of a Porous Ceramic Foam Coating from Elastic Substrates

Thermo-mechanical Analysis of a Multilayer Hollow Cylindrical Thermal Protection Structure with Functionally Graded Ultrahigh-Temperature Ceramic to Be Heat Resistant Layer

Damage Evolution and Fracture of Ceramic Coating Systems in Circle Plate Bending Tests: Experimental Observation and Modeling

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Numerical Analysis of Thermal Shock Cracking Behaviors of Ceramics Based on the Force-Heat Equivalence Energy Density Principle

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Thermal shock resistance analysis methodology of ceramic coating/metal substrate systems

Research on dynamic mechanical properties and damage model of ceramic materials under multi‐axial stress

Size-dependent Damage and Fracture of Two-Layer Systems

Quantitative In-Situ Study of Strength-Governed Interfacial Failure Between H-Bn and Polymer-Derived Ceramic

Analysis, Simulation and Experimental Study of the Tensile Stress Calibration of Ceramic Cylindrical Pressure Housings

Numerical study of thermomechanical delamination mechanisms in segmented high-temperature coatings

Influences of Interface Properties and Coating Thickness on Fracture Behaviors of Coating/substrate Systems

An Armour Structure to Suppress the Brittle Failure of Ceramic Coatings

The Analysis of Delamination and Fracture in IC Packages

Finite Element Analysis of Stress Field of Thermal Barrier Coating during the Deposition Process

Strength evaluation of brittle ceramics with surface defects subjected to thermal shock

Strength damage behavior analysis of silicon carbide(SiC) ceramic cylindrical shells under hydrostatic pressure based on the state-based peridynamics

Elasto-plastic stress analysis and burst strength evaluation of Al-carbon fiber/epoxy composite cylindrical laminates

Research of the Sensitivities of Fracture Strength of Porous Ceramic Materials to the Relevant Parameters