Abstract:The major problem with quad flat no-lead package (QFN) packages is the delamination between the copper lead-frame and the molding compound (MC) due to relatively weak adhesion. The copper lead frame has excellent electrical and thermal conductivity. However, moisture penetration not only reduces the adhesion between the interfaces of the two materials, but also adversely affects the conductivity of Cu. Interface stratification is attributed to different material properties such as mismatch of coefficient of moisture expansion (CME), surface treatment of the mold pad, thermal strain, vapor pressure at high temperatures, and reduced interface strength due to moisture and temperature effects.The work presented in this paper focused on moisture, thermal and vapor pressure effects on the lead-frame and molding compound in the QFN during the precondition test and reflow process. The causes of delamination were examined both experimentally and via simulations. In an electronic package, the main failure effect stems from molding compound. To accurately simulate the moisture distribution in QFN, in this work, the moisture mechanism pertaining to material properties was investigated. This investigation focused on the MC and epoxy coefficient of moisture expansion and vapor pressure, and the parameters obtained by experimental study were incorporated into a simulation model to verify the fit between the experimental and the simulation findings. The electronic components employed in this work are standard for moisture sensitive testing, according to JEDEC J-STD-020D. To measure the specimen weight gain and geometric size, electronic balance and microscope were used, and these values were obtained under moisture sensitive level 1, level 2 and level 3 in order to establish the moisture desorption rate of the QFN package. And also according to the different degree of oxidation on the leadframe, the surface analysis of the material is carried out by environmental scanning electron microscope (ESEM) to understand the element distribution and interfacial strength. In addition, finite element analysis (FEA) was performed to analyze the stress, warpage and delamination in QFN packages. In this research will discuss the coupling forces of moisture, thermal stress and vapor pressure under MSL-3 and Reflow, and discuss the interface strength under different reliability test stages. To verify the accuracy of simulation modeling, the delamination site was observed and was aligned with the simulation results by applying scan acoustic tomography (SAT). Finally, the reliability of QFN was enhanced by investigating the moisture behavior of the materials co mprising the QFN.

The Analysis of Delamination and Fracture in IC Packages

Dynamic Substructure Method for Prediction of Solder Joint Reliability of IC Package under Drop Test

Moisture Assist Delamination In Multiple Die Stacked Package

The delamination of solder ball involving moisture and thermal effect in IC package

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Nondestructive Evaluation of Delamination in IC Packages by Millimeter-Waves

Numerical Simulation of Interfacial Delamination in Electronic Packaging

Finite Element Analysis on Dry Baking of Plastic IC Components

Mode I Fatigue and Fracture Assessment of Polyimide–Epoxy and Silicon–Epoxy Interfaces in Chip-Package Components

Microwave Imaging of Delaminations in IC Packages

Fracture analysis on die attach adhesives for stacked packages based on in-situ testing and cohesive zone model.

Simulation and Analysis of Quad Flat No-lead Package (QFN) under Moisture, and Thermal Stress

Finite element analysis of 2.5D packaging processes based on multi-physics field coupling for predicting the reliability of IC components

Delamination of Plasticized Devices in Dynamic Service Environments

Mathematical and Simulation Modelling of Moisture Diffusion Mechanism During Plastic IC Packages Disassembly

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Research on delamination failure of plastic ic packages in components reuse processes

Thermal deformation analysis of BGA package by digital image correlation technique

Simulation Research on the Influence of Stress Relaxation on Plastic Ic Delamination During Scrapped Pcb Disassembly

Simulation and analysis of delamination damage propagation in CFRP structures

Simulation of Interfacial Delamination Crack of Waste Plastic Chips