Abstract:The mechanical strengths of silicon wafers are crucial for the manufacturing yield of integrated circuits (ICs), which have received intensive attention over the years. With reducing the feature size of ICs, the mechanical strengths of silicon wafers become more significant. Actually, the gliding of indentation dislocations on single-crystalline silicon wafers at a given temperature reflects the mechanical strengths of silicon wafers. Since the gliding of indentation dislocations is driven by the residual stress around the indentation, the investigation on the correlation between the residual stress and dislocation gliding is of significance. In this paper, we first use micro-Raman microscopy to characterize the relief of stress around the indentation due to the annealling at 300 or 500 ℃. Then the effect of such a relief-stress on the gliding of indentation dislocations at 700-900 ℃ is investigated. In the case without the prior stress-relief, the indentation dislocations glide to the maximum distance after 2 h annealling at 700-900 ℃. With the prior stress-relief due to the annealling at 300 or 500 ℃, the indentation dislocations can still glide to the maximum distance after 2 h annealling at 900 ℃, however the gliding velocity significantly decreases and the gliding distance is remarkably reduced after 2 h annealling at 700 or 800 ℃. Such a reduction of gliding distance is most significant in the case of 700 ℃ annealling following the stress-relief with the 500 ℃/2 h annealling. Despite the prior stress-relief, as long as the annealing time at 700 or 800 ℃ is sufficiently extended, the indentation dislocations can glide to the maximum distance. In view of the above results, it is believed that the maximum gliding distance of indentation dislocations at a given temperature is independent of the values of residual stress around the indentation provided that the residual stresses are larger than the critical stress for driving the dislocation movement. Nevertheless, the annealing time for achieving the maximum gliding distance at a given temperature should be remarkably extended as the residual stresses around the indentation are relieved.

Simulation Research on the Influence of Stress Relaxation on Plastic Ic Delamination During Scrapped Pcb Disassembly

Research On High-Frequency Vibratory Stress Relief For Small Assembly

Research on delamination failure of plastic ic packages in components reuse processes

Dynamic Substructure Method for Prediction of Solder Joint Reliability of IC Package under Drop Test

Mathematical and Simulation Modelling of Moisture Diffusion Mechanism During Plastic IC Packages Disassembly

Heating Strategy for Waste PCB Disassembly Oriented to the Reuse of Disassembled Components

Effect of Prior Stress-Relief on the Gliding of Indentation Dislocations on Silicon Wafers

The delamination of solder ball involving moisture and thermal effect in IC package

The Analysis of Delamination and Fracture in IC Packages

Study of Local Stress Using Stress-Absorbing Si Diaphragm

Finite element analysis of 2.5D packaging processes based on multi-physics field coupling for predicting the reliability of IC components

Warpage behavior of the flip chip package in underfill curing process: in situ characterization and numerical simulation

Effect of Stress Relaxation on Insulating Properties of Dielectric Elastomers with Different Pre-strain Ratios

The effect of residual stress on the flexing strength of PCB assembly

Investigation into Reusability of Disassembled Chip

Initial Thermal Stress and Strain Effects on Thermal Mechanical Stability of Through Silicon Via

Research on Stress in Flip Chip Packaging with Silicon Piezoresistive Stress Sensor

Investigation on Solder Bump Process Polyimide Cracking for Wafer Level Packaging

Finite Element Analysis on Dry Baking of Plastic IC Components

Simulation methodology development of warpage estimation for epoxy molding compound under considerations of stress relaxation characteristics and curing conditions applied in semiconductor packaging

Delamination of Plasticized Devices in Dynamic Service Environments