Abstract:The paper presented an experimental study on the effect of the resin reinforced core configuration and core thickness on in-plane compressive responses and failure behaviors of composite sandwich specimens. Two resin reinforced core machining configurations were designed with three core thickness along. In-plane compressive load, displacement, strains on both sides, and failure morphology were closely monitored during the loading process. Meanwhile, the theoretical method also was supplementary to forecast the failures of sandwich structures. It was found that the enhancement of grooved, perforated holes and contour cut (GPC) core was better than double-side grooved and perforated hole (DGP) core to improve the in-plane compressive capacity of sandwich specimens for all thick cores. The core fracture or skin/core debonding failure of sandwich specimens resulted in an instant drop of in-plane compressive load, and the global buckling led to a slower reduction. The failure mode changed from global buckling to skin/core debonding at both sides as the core thickness increased for the Plain core sandwich specimen; switched from global buckling to a combined failure of core fracture and skin/core debonding at both sides, and then to skin/core debonding at both sides for the DGP core sandwich specimen; the skin/core debonding at the shallow side occurred for all GPC core specimens. The slight buckling trace of strains before the peak load probably triggered the skin/core debonding of sandwich specimens. The theoretical method could well forecast failure loads and corresponding failure modes of sandwich specimens with the 15 mm thick core, and reasonably predict failure loads for sandwich specimens with 30 mm and 45 mm thick cores.

Effects of Microstructures of Foam Core on the Thermal Shock Strength of Ceramic Foam Sandwich Structures

Thermal Shock Resistance of Ceramic Foam Sandwich Structures: Theoretical Calculation and Finite Element Simulation

Experiment and numerical simulation of anti-penetration performance of composite structures

The Thermal Shock Resistance Analysis of Ceramic Foams

On low-velocity impact response of foam-core sandwich panels

Mode II Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures: the Effects of Frictional Stresses Between the Crack Edges

Fracture behaviour of foam core sandwich structures with manufacturing defects using phase-field modelling

Mode I Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures

A Multi-Scale Model for Predicting the Thermal Shock Resistance of Porous Ceramics with Temperature-Dependent Material Properties

Thermal Shock Resistance Analysis of a Semi-Infinite Ceramic Foam

Crack Growth Behavior and Thermal Shock Resistance of Ceramic Sandwich Structures with an Auxetic Honeycomb Core

Mechanical Model for the Interfacial Thermal Stress in Porous Ceramic Foam Coatings Bonded to a Substrate

Effects of Unit Cell Parameters on the Thermal Shock Resistance of Auxetic Honeycomb Sandwich Structures: Combining Discrete and Continuum Model

Thermal Vibration Characteristics of Fiber-Reinforced Mullite Sandwich Structure with Ceramic Foams Core

The microstructural characterization and mechanical response of YSZ ceramic foams fabricated via volume-controlled foaming

High temperature and mesostructure effect on aluminum foam compression responses

Experimental and Numerical Study on the Low-Velocity Impact Behavior of Foam-Core Sandwich Panels

Effect of insulation core type on thermal conductivity of sandwich structure

Analytical Method for Determination of Temperature-Induced Interfacial Shear Stress in Foam-Core Composite Sandwich Materials

High-velocity impact response of metallic sandwich structures with PVC foam core

In-plane compressive responses and failure behaviors of composite sandwich plates with resin reinforced foam core