Abstract:<p>Different from traditional ceramic materials, three-dimensional (3D) porous ceramics have become a research hotspot in recent years due to combinative of light-weight and high strength. Meanwhile, the 3D printing technique, which can be used to design hierarchical porous structures by combining flexible design and advanced manufacturing procedures, is regarded as a revolutionary and attractive tool for the preparation of 3D porous ceramics. Herein, a novel road is reported for fabricating 3D porous ceramic lattices with excellent mechanical properties by bridging 3D printing and SiC chemical vapor infiltration. The effects of coordination number, rotation angle, hollow structure and sintering temperature on the performance of ceramic lattices were also investigated. As revealed by the results, the cubic lattices possess the highest compressive strength and fracture work, 41.93 MPa and 2126.7 kJ/m<sup>2</sup>, respectively. Among different hollow lattices, the stability and bearing capacity of triangular structures were superior to that of square and honeycomb structures. The compressive strength of the triangular hollow lattices can reach up to 31.20 MPa. And the fracture work of the 3D porous lattices without rotation can be 7 times that of the lattices with a rotation angle of 30° and 45°. Moreover, as the sintering temperature rises, the compressive strength of 3D porous ceramics gradually increases while the shrinkage tends to be more serious. Additionally, the fracture work of 3D porous ceramics reaches its peak at a sintering temperature of 1400 °C. The approach developed in this work provides a simple, economic, and effective way to fabricate 3D porous ceramics, which leads to promising applications in future functional devices.</p>

Three‐dimensional (3D) flexible nanofibrous network knitting on hierarchical porous architecture

Facile Fabrication of Nanofibrous Network Reinforced Hierarchical Structured Porous Si3N4-based Ceramics Based on Si-Si3N4 Binary Particle-Stabilized Foams

Fabrication and Characterization of Hierarchical Porous SiC Ceramics Via Gelcasting and Carbothermal Reduction Between Carbon and SiO

Highly Porous ZrO2 Cellular Ceramics with 3D Network Architecture

Structure design influencing the mechanical performance of 3D printing porous ceramics

Manufacture of Si3N4-SiCN composite bulks with hierarchical pore structure

Microstructure, thermal, and mechanical properties of hierarchical porous silicon carbide made by direct ink writing

3D Printing of Hollow Microspheres into Strong Hierarchical Porous Ceramics

3D printing boehmite gel foams into lightweight porous ceramics with hierarchical pore structure

In Situ Synthesis of Three-Dimensional Nanofiber-Knitted Ceramic Foams Via Reactive Sintering Silicon Foams

Achieving Remarkable Specific Mechanical Strength and Energy Absorption Capacity in SiC Nanowire Networks through Graded Structural Design

Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS)

Tailoring of Porous Structure in Macro-Meso-Microporous SiC Ultrathin Fibers via Electrospinning Combined with Polymer-Derived Ceramics Route

Preparation and properties of ultralight fibrous β-Si3N4 3D scaffolds with honeycomb-like structure by directional freeze-casting

Directly Growing Nanowire-Assembled Nanofibrous Ceramic Foams with Multi-Lamellar Structure Via Freeze-Casting Process

A new approach for the net-shape fabrication of porous Si3N4 bonded SiC ceramics with high strength

Advanced hierarchical biomorphous silicon carbide monoliths

3D printing of porous SiC ceramics added with SiO2 hollow microspheres

Hierarchically Porous Ceria with Tunable Pore Structure from Particle-Stabilized Foams

Hierarchical Ceramic Foams with 3D Interconnected Network Architecture for Superior High-Temperature Particulate Matter Capture

Microstructure and Properties of Porous Si3n4 Ceramics with A Dense Surface