Abstract:Polymer/bioceramic composite scaffolds have been widely regarded as promising biomimetic substitutes for bone tissue engineering owing to their tailored mechanical properties and improved bioactivity. Fused deposition modeling (FDM), which is a simple and cost-effective 3D printing technology, enables the fabrication of scaffolds with predetermined and controllable internal architecture. In this study, poly(vinyl alcohol)/beta-tricalcium phosphate (PVA/beta-TCP) composite scaffolds were constructed using FDM. The thermal behavior, printability, microstructure and mechanical properties of the composite scaffolds were investigated. The results showed that beta-TCP particles were homogeneously dispersed into the PVA matrix with the assistance of solid state shear milling. Hydrogen bonding interactions were formed between beta-TCP and PVA, which helped to improve the interface strength of the composites. By using water and glycerin as a co-plasticizer, the as-prepared composite filaments that were suitable for the FDM process exhibited improved thermal processability. In addition, the printability window of the material was theoretically established based on the ratio of its compressive modulus to the apparent viscosity. SEM and mu CT analyses indicated that as-fabricated scaffolds had well-structured shapes and totally interconnected channels. Meanwhile, the loading-bear capabilities of the composite scaffolds were significantly enhanced with an increase in the beta-TCP content up to 20 wt%; e.g., the maximum stress increased from 8.3 to 10.7 kPa. Moreover, in vitro cell culture studies revealed that the resulting composite scaffolds possess good biocompatibility, which is favorable to cell adhesion and proliferation. These results strongly indicate the potential of the fabricated scaffolds in tissue engineering applications.

Fabrication of Β‐tricalcium Phosphate Composite Ceramic Scaffolds Based on Spheres Prepared by Extrusion‐spheronization

Fabrication of β-tricalcium phosphate composite ceramic sphere-based scaffolds with hierarchical pore structure for bone regeneration

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Fabrication of calcium phosphate-based tissue-engineering porous microspheres

Fabrication of Porous Beta-Tricalcium Phosphate with Microchannel and Customized Geometry Based on Gel-Casting and Rapid Prototyping.

Fabrication of Bioceramic Scaffolds with Pre-Designed Internal Architecture by Gel Casting and Indirect Stereolithography Techniques

Fabrication of HA/β‐TCP Scaffolds Based on Micro‐syringe Extrusion System

Fabrication and Properties of Poly(vinyl Alcohol)/β-Tricalcium Phosphate Composite Scaffolds Via Fused Deposition Modeling for Bone Tissue Engineering

3D Printing Magnesium-Doped Wollastonite/β-Tcp Bioceramics Scaffolds with High Strength and Adjustable Degradation

Preparation And Characterization Of Biodegradable Beta-Tcp-Based Composite Microspheres As Bone Tissue Engineering Scaffolds

Preparation and characterization of porous bioceramic scaffold based on additive manufacturing and gel-casting technology

Three-Dimensional Printing Of Beta-Tricalcium Phosphate/Calcium Silicate Composite Scaffolds For Bone Tissue Engineering

Three-dimensional printing of $$\varvec{\upbeta }$$β-tricalcium phosphate/calcium silicate composite scaffolds for bone tissue engineering

Fabrication, Characterization and Cellular Biocompatibility of Porous Biphasic Calcium Phosphate Bioceramic Scaffolds with Different Pore Sizes

Preparation and characterization of porous apatite-wollastonite/β-tricalcium phosphate composite scaffolds

Microstereolithography-Based Fabrication of Anatomically Shaped Beta-Tricalcium Phosphate Scaffolds for Bone Tissue Engineering

Fabrication and characterization of composite porous scaffold of β-tricalcium phosphate / poly(lactic acid)

Preparation and Characterisation of Ha/Tcp Biphasic Porous Ceramic Scaffolds with Pore-Oriented Structure

Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering

369Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering

Techniques for fabrication and construction of three-dimensional bioceramic scaffolds: Effect on pores size, porosity and compressive strength