Abstract:A series of WO3 modified iron-titanate mixed metal oxides catalysts (the molar ratio of Fe/Ti = 4:1) were synthesized by conventional impregnation method and tested for selective catalytic reduction of NOx by NH3. The addition of WO3 species could enhance the catalytic performance of FeTiOx and 6 W/FeTiOx showed optimal activity with above 80 % NO conversion under a wide operating temperature window of 200-400 degrees C. It also exhibited excellent stability in the presence of H2O and SO2 at 250 degrees C, even as low as 225 degrees C, which provided a suitable deNO(x) candidate for stationary sources. The characterization methods including XRD, BET, XPS, H-2-TPR, NH3-TPD, NO-TPD and in situ DRIFTs were used to investigate the structure and surface properties of catalysts and their influence on the catalytic activity. The results demonstrated that the impregnation of WO3 species led to the strong electronic inductive effects between Fe3+ and W6+, Ti4+ and W6+ in the forms of Fe(3+n)+-O-W(6-n)+ and Ti(4+n)+-O-W(6-n)+ structures, increasing the ratio of chemical adsorbed oxygen species, surface OH-, which were stimulative to low-temperature NH3-SCR reaction. The increased amount of surface Bronsted acid sites mainly came from W-OH species. Besides, the reaction pathway over 6 W/FeTiOx mainly followed Eley-Rideal mechanism at 225 degrees C through the reaction between gaseous NO and adsorbed NH3 species.

Preparation of γ-Fe2O3 Catalysts and their deNO x Performance: Effects of Precipitation Conditions

The development of Fe2O3-based catalysts used for the selective catalytic reduction of NOx with NH3: A review

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

New Insights into the Relationships Between Performance and Physicochemical Properties of FeOx–NbOx Mixed Oxide Catalysts for the NH3-SCR Reactions

Effects of Different Precipitants on the De–NO Efficiency of the Fe2O3 Catalyst Synthesized by Co-precipitation Method

Study on the performance of magnetic Co3O4/γ-Fe2O3 catalyst in NO + CO reaction

Insights over Titanium Modified FeMgOx Catalysts for Selective Catalytic Reduction of NOx with NH3: Influence of Precursors and Crystalline Structures

Promotional effect of aluminum doping on the sulfated Fe2O3 catalyst in selective catalytic reduction of NO with NH3

Ce(SO4)2/α-Fe2O3 selective catalytic reduction of NOx with NH3: preparation, characterization, and performance

Investigation of Fe-Ni Mixed-Oxide Catalysts for the Reduction of NO by CO: Physicochemical Properties and Catalytic Performance

Preparation and Investigation of Iron–Cerium Oxide Compounds for NOx Reduction

Synthesis of Mn-Fe/γ-Al2O3 and Its Performance in Catalytic Oxidation of NO

Effect of Fe Reduced-Modification on TiO 2 Supported Fe–Mn Catalyst for NO Removal by NH 3 at Low Temperature

Metal-organic framework assisted preparation of α-Fe2O3 for selective catalytic reduction of NOX with NH3

Capability of molecular sieve-supported FeSO_4 catalyst for selective catalytic reduction of NO_x

Magnetic iron-cerium-tungsten mixed oxide pellets prepared through critic acid sol-gel process assisted by microwave irradiation for selective catalytic reduction of NOx with NH3

Enhancement of Low-Temperature Activity of Γ-Fe2o3-Modified V2o5-Moo3/Tio2 Catalysts for Selective Catalytic Reduction of Nox with Nh3

Experimental and Kinetic Study on the Influence of Iron Oxide on the Selective Noncatalytic Reduction Deno(X) Process

Activity enhancement of WO<sub>3</sub> modified FeTiO<sub>x</sub> catalysts for the selective catalytic reduction of NO<sub>x</sub> by NH<sub>3</sub>

Study on the Effect of Fe Doping on SCR Activity and Reaction Mechanism of Mn–TiO2 Catalysts

Doped-Nd Enhanced the Performance of FeCoMnCe Catalyst on the NOx Selective Catalytic Reduction