Abstract:In this study, the electrochemical performance and discharge behavior of Mg-Li-Zn-Gd alloys with α-Mg and β-Li-based anode material are investigated, with the aim to improve the anode performance of Mg-air batteries. The experimental anode alloys with detailed Mg-8Li-xZn-yGd (x = 1, 2, 3; y = 1, 2, 3 wt.%) components are prepared, and extrusion deformation is carried out on these alloys. Simultaneously, scanning electron microscope (SEM), X-ray diffractometer (XRD), electrochemical workstation, and constant current discharge systems are applied for microstructure characterization, corrosion, and discharge performance testing. The results show that the experimental alloys are composed of an α-Mg and β-Li dual matrix, with W-Mg3Gd2Zn3, Mg3Gd, and MgLiZn second phases. Meanwhile, extrusion deformation promotes the recrystallization process through the particle-induced nucleation mechanism. The corrosion resistance is improved with the increasing Zn/Gd ratio, and the extruded Mg-8Li-2Zn-1Gd (LZG821) alloy exhibits the optimum corrosion resistance, with a corrosion rate of 0.493 mm·year−1. In addition, the extruded Mg-8Li-1Zn-1Gd (LZG811) alloy has the optimal discharge performance, with a discharge specific capacity of 1371.04 mA·g−1 at a current density of 40 mA∙cm−2, and its anode efficiency reaches nearly 70%. The poorer discharge properties of the Mg-8Li-2Zn-1Gd (LZG821) and Mg-8Li-2Zn-3Gd (LZG823) alloys are attributed to their refined grains, which could bring severe intergranular corrosion while increasing the grain boundary density.

Performance of Mg–9Al–1In Alloy As Anodes for Mg-Air Batteries in 3.5 Wt% NaCl Solutions

Electrochemical Performance of Mg-3Al Modified with Ga, in and Sn As Anodes for Mg-Air Battery

Discharge Behaviour of Mg-Al-Pb and Mg-Al-Pb-In Alloys As Anodes for Mg-air Battery

Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution

Performance of Al−1Mg−1Zn−0.1Ga−0.1Sn As Anode for Al-air Battery

Electrochemical Performance of Al-1Zn-0.1In-0.1Sn-0.5Mg-xMn (x = 0, 0.1, 0.2, 0.3) Alloys Used as the Anode of an Al-Air Battery

Performance of Al–0.5 Mg–0.02 Ga–0.1 Sn–0.5 Mn As Anode for Al–air Battery in NaCl Solutions

The Dependence of Electrochemical Behavior and Discharge Performance on the Zn/Gd Ratio of Mg-Li-Zn-Gd Anodes for Mg-Air Batteries

A corrosion resistant die-cast Mg-9Al-1Zn anode with superior discharge performance for Mg-air battery

Electrochemical Performances of Al–0.5Mg–0.1Sn–0.02In Alloy in Different Solutions for Al–air Battery

A micro-alloyed Mg-Zn-Ge alloy as promising anode for primary Mg-air batteries

Superior discharge performance of Mg-air battery: The influence of anodic intermetallic compounds Mg 41 Nd 5 in Mg-4Li-3Nd-0.2Zn alloy

Magnesium–Air Battery with Increased Power Using Commercial Alloy Anodes

Electrochemical Performance of Pure Al, Al–Sn, Al–Mg and Al–Mg–Sn Anodes for Al-air Batteries

Effects of Heat Treatment on the Discharge Behavior of Mg-6wt.%Al-1wt.%Sn Alloy As Anode for Magnesium-Air Batteries

The Corrosion and Discharge Behavior of High-Performance Mg-7Li-1Y Alloy As Anode for Mg-air Batteries

Corrosion Behaviour and Discharge Properties of Extruded Mg-Zn-Ca Anodes for Primary Mg-air Batteries

Performance improvement for aluminum-air battery by using alloying anodes prepared from commercially pure aluminum

Corrosion and discharge behavior of Mg-Zn-Mn-Nd alloys as primary Mg-air batteries anode

Effects of Microstructure on the Electrochemical Discharge Behavior of Mg-6wt%Al-1wt%Sn Alloy As Anode for Mg-air Primary Battery

Discharge performance of Mg-Y binary alloys as anodes for Mg-air batteries