Abstract:The microstructural stability and coarsening kinetics of gamma ' precipitates in a nickel-based single crystal superalloy (Ni-SX) were thoroughly investigated under various thermal exposure treatments. The evolutions of characteristic parameters including gamma ' size, morphology, area fraction, and gamma channel width were documented. Coarsening rate constants and particle size distributions (PSDs) were calculated and recorded based on measured precipitate sizes at temperatures ranging from 800 degrees C to 1100 degrees C and durations ranging from 100 h to 1010 h. The experimentally derived rate constants were compared with the calculated theoretical values from two mainstream models: matrix-controlled diffusion (LSW model) and interface-controlled diffusion (TIDC model). Notably, transitional coarsening kinetics of gamma ' precipitates from the LSW model to the TIDC model was observed at high temperatures over time. Through a comprehensive consideration of key coarsening kinetics parameters such as elemental diffusivity, trans-interface diffusion coefficient, coarsening rate constant, gamma/gamma ' interfacial area, and solute mass transfer, the transformation of the coarsening kinetics from matrix-controlled diffusion to interface-controlled diffusion was quantitatively discussed. The emergence of the TIDC model as the dominant mechanism was attributed to relatively smaller solute mass transfer through the interface. Moreover, the degradation of gamma/gamma ' interfacial energy and interfacial area, coupled with the increase in solute diffusion coefficient in the matrix, facilitated the trans-interface diffusion to act as a limiting factor throughout the coarsening process.

Effect of Interactions Between Elements on the Diffusion of Solutes in Ni X Y Systems and Γ′-Coarsening in Model Ni-based Superalloys

Effect of Substrate Characteristics on Interdiffusion Coefficients of Ni and Al Atoms in Β-Nial Phase of Aluminide Coatings

Partitioning and Diffusion of Transition Metal Solutes in Ternary Model Ni-based Single Crystal Superalloys

Homogenizing Effects of Co on Multi-Scale Elemental Distribution in Ru-containing Ni-based Single Crystal Superalloys

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Diffusion Modelling on the Microstructure Evolution in MCrAlY-Superalloy System

Effect of alloying elements on the coarsening rate of γʹ precipitates in multi-component CoNi-based superalloys with high Cr content

Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

Determination of interdiffusion coefficients in single crystal superalloys based on solute distribution at the dendritic scale using the Gaussian solution model

Synergistic effects of Al and Mo on coarsening kinetics of Ni-based superalloys at 1200°C

The Effects of Key Elements Re and Ru on the Phase Morphologies and Microstructure in Ni-based Single Crystal Superalloys

Effects of Co on Microstructure Evolution of a 4th Generation Nickel-Based Single Crystal Superalloys

Microstructural evolution and element interdiffusion of NiAlHf and NiAlHfY coatings deposited on a Ni-based superalloy

Diffusion in Ni-Based Single Crystal Superalloys with Density Functional Theory and Kinetic Monte Carlo Method

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

Solute diffusion in the γ′ phase of Ni based alloys

A model for the compositions of non-stoichiometric intermediate phases formed by diffusion reactions, and its application to Nb3Sn superconductors

Coarsening Transitional Kinetics of Γ′ Precipitates in a Nickel-Based Single Crystal Superalloy During Thermal Exposure

Density functional theory study of the thermodynamic and elastic properties of Ni-based superalloys

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure