Abstract:The microstructure evolution of Ni-based superalloys during heat treatment is of great significance for obtaining better service performance. However, heat treatment experimentation is costly and time-consuming, and sometimes fails to reveal physical mechanisms well. In the present study, a multiphase-field model coupled with an explicit nucleation algorithm was established to simulate the precipitation and growth of γ′ phase in DD6 superalloy, which can be applied to a multicomponent elastic-inhomogeneous system. The PanNickel© database was used to calculate thermodynamic and kinetic data in multicomponent superalloys. First, the coupling method of multiphase-field model and explicit nucleation algorithm was introduced. The coupled model was used to simulate the precipitation of γ′ phase under isothermal and non-isothermal conditions. It was found that a unimodal microstructure was formed under isothermal conditions and there was a “soft impingement” phenomenon, while a bimodal distribution composed of cuboidal γ′ precipitates and fine secondary γ′ precipitates was formed during a cooling process of 25–125 °C/min. The effect of cooling rate was studied. Then, the chemical and elastic driving forces were analyzed. It was found that Al and Ta contributed most to the chemical driving force, while Re and W gathered at the γ/γ′ interface and inhibited the growth of γ′ phase. γ′ precipitates had a cuboidal shape under the influence of elastic driving force. Finally, the growth and coarsening process of γ′ phase was studied and compared with the well-known Lifshitz−Slyosov−Wagner (LSW) theory. The growth of γ′ phase can be divided into rapid growth, coarsening and quasi-static coarsening stages according to the simulation results, among which the coarsening stage is basically consistent with the LSW theory. The current model can be used to simulate the precipitation and growth of single crystal superalloys where multicomponent and elastic effects are considered.

Determination of interdiffusion coefficients in single crystal superalloys based on solute distribution at the dendritic scale using the Gaussian solution model

A Finite Difference Method for Determining Interdiffusivity of Aluminide Coating Formed on Superalloy

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Effect of Interactions Between Elements on the Diffusion of Solutes in NiXY Systems and Γ′-Coarsening in Model Ni-based Superalloys

Partitioning and Diffusion of Transition Metal Solutes in Ternary Model Ni-based Single Crystal Superalloys

Numerical Simulation of Dendrite Growth for Binary Alloy During Non-Isothermal Solidification

New Model for Predicting Homogenization Kinetics of Typical Wrought Superalloy

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Dendritic Solidification of Highly Undercooled Dilute Alloys

Diffusion in Ni-Based Single Crystal Superalloys with Density Functional Theory and Kinetic Monte Carlo Method

Microstructure, Mechanical Properties and Thermal Stability of Ni-Based Single Crystal Superalloys with Low Specific Weight

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Variation of Homogenization Pores during Homogenization for Nickel‐Based Single‐Crystal Superalloys

Experimental Study on the Micro-Mechanical Parameters of Ni-based Single-Crystal Superalloys Using Nanoindentation and Element Distribution Analysis

Multiphase-field Simulation of the Solution Heat Treatment Process in a Ni-based Superalloy

Precipitation and Growth Simulation of Γ′ Phase in Single Crystal Superalloy DD6 with Multiphase-Field Method and Explicit Nucleation Algorithm

A Model for Simulation of Recrystallization Microstructure in Single-Crystal Superalloy

A Quantitative Study of the Solute Diffusion Zone During Solidification of Al-Cu Alloys Via In-Situ Synchrotron X-radiography and Numerical Simulation

Design of Solution Treatment for High-Generation Single-Crystal Superalloys with Enhanced Refractory Content

A unified model for micro-scale solute redistribution in dendrite solidification of alloys

A new treatment of alloying effects on migrating interfaces in Fe-X alloys