Abstract:Stainless steels with excellent hardness and corrosion resistance performance have been widely used in industrial production. Ternary Fe-Cr-Ni alloys, as a model alloy of nickel chromium stainless steels, are of great importance in the fields of material science. Under non-equilibrium solidification condition, alloys may have new microstructure and improved performance. In this paper, two liquid ternary Fe-Cr-Ni alloys are deeply undercooled and rapidly solidified in a 3-m drop tube to investigate the microstructure evolution and solute distribution of alloy droplets with different sizes. In the drop tube experiments, the Fe-Cr-Ni alloy samples with a mass of 1.5 g are placed in a phi 16 mm x 150 mm quartz tube with a 0.5-mm-diameter orifice at its bottom and heated by induction heating device in a high vacuum chamber. Then the samples are melted and overheated to 200 K above their liquidus temperatures for several seconds. The alloy melt is ejected out of the small orifice and dispersed into numerous droplets after adding high pressure helium gas flow. The alloy droplets with diameters ranging from 68 mu m to 1124 mu m are achieved. After experiments, the alloy droplets with different sizes are mounted respectively. Then they are polished and etched. The drop tube technique provides an efficient way to study the rapid solidification mechanism of alloys. Besides the experiments, the dendrite growth velocities of primary phase in two Fe-Cr-Ni alloys are calculated theoretically using the modified LKT/BCT model. As droplet size decreases, both cooling rate and undercooling increase exponentially and the morphologies of two alloys become well refined. Under the near-equilibrium solidification condition with a cooling rate of 10 K/min, both alloys consist of coarse lath-like alpha phase. After rapid solidification of Fe81.4Cr13.9Ni4.7 alloy droplets during free fall, the microstructure presents a lath-like a phase, resulting from the solid-solid phase transition. As undercooling increases, the primary delta phase is converted from the coarse dendrite with long trunk into equiaxed grain. For Fe81.4Cr4.7Ni13.9 alloy, the microstructure is composed of alpha phase grains. The transition of primar gamma phase from coarse dendrite with long trunk to refined equiaxed grain occurs as the undercooling increases. Meanwhile, both dendrite trunk length and secondary dendrite arm spacing decrease drastically, suggesting that the rapid solidification is the main reason for grain refinement. Moreover, the relative segregation degree of solute Cr and Ni inside alpha phase grain also decreases obviously with the increase of undercooling, and the microsegregation of Ni is more remarkable than that of Cr. This suggests that the high cooling rate and undercooling cause the solute to be distributed evenly. Compared with that of gamma phase, the dendrite growth velocity of delta phase is large and its dendrite tip radius is small. The two phase transform from solute diffusion controlled growth into thermal diffusion controlled growth as undercooling increases to 8 K. When undercooling is larger than 8 K and within the experimental undercooling range, the dendrite growth of both Fe-Cr-Ni alloys is controlled by thermal diffusion.

Partitioning and Diffusion of Transition Metal Solutes in Ternary Model Ni-based Single Crystal Superalloys

Effect of Interactions Between Elements on the Diffusion of Solutes in NiXY Systems and Γ′-Coarsening in Model Ni-based Superalloys

Atomic-Scale Computer Simulation for Ternary Alloy Ni-Cr-Al During Early Precipitation Process

Investigation of the Elemental Partitioning Behaviour and Site Preference in Ternary Model Nickel-Based Superalloys by Atom Probe Tomography and First-Principles Calculations

Transition Metal Solutes in Ni-based Ternary Model Superalloys: Partitioning and Effects on Elastic Properties from First-Principles Calculations

Rapid dendrite growth mechanism and solute distribution in liquid ternary Fe-Cr-Ni alloys

Solute diffusion in the γ′ phase of Ni based alloys

Influences of Solution Cooling Rate on Microstructural Evolution of a Multiphase Ni3Al-based Intermetallic Alloy

Effect of Interactions among Elements on Diffusion Process Associated with Γ′ Coarsening in a Ni-Based Single-Crystal Superalloy

Diffusion in Ni-Based Single Crystal Superalloys with Density Functional Theory and Kinetic Monte Carlo Method

Unraveling L1 2 Al 3 X (X=Ti, Zr, Hf) Nano-Precipitate Evolution in Aluminum Alloys via Multi-scale Diffusion Simulation

Effect of alloying elements on the coarsening rate of γʹ precipitates in multi-component CoNi-based superalloys with high Cr content

The Thermodynamic Stability Induced by Solute Co-Segregation in Nanocrystalline Ternary Alloys

Identification of the partitioning characteristics of refractory elements in σ and γ phases of Ni-based single crystal superalloys based on first principles

Phase-Field Modeling of Kinetics of Diffusive Phase Transformation in Compositionally-Graded Ni-Based Superalloys

Site preferences of alloying transition metal elements in Ni-based superalloy: A first-principles study

The effects of diffusional couplings on compositional trajectories and interfacial free energies during phase separation in a quaternary Ni-Al-Cr-Re model superalloy

Effect of Γ Forming Element Additions on the Homogenization Behavior and Formation of Hierarchical Microstructures in Ni-based Superalloys

The Effects of Solutes Like Ruthenium on Precipitation of Σ Phase and Σ/γ Interface Stability in Ni-based Superalloys

Elemental partitioning in Ru-containing nickel-base single crystal superalloys

Screening of Possible Re-Substitutional Elements in Single-Crystal Ni-Based Superalloys: A Viewpoint from Interdiffusion Coefficients in Ni-Al-X Ternaries