Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

High yield production of C2–C3 olefins and para-xylene from methanol using a SiO2-coated FeOx/ZSM-5 catalyst

High yield production of C<sub>2</sub>–C<sub>3</sub> olefins and para-xylene from methanol using a SiO<sub>2</sub>-coated FeO<sub>x</sub>/ZSM-5 catalyst

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Utilization of Metal-Functionalized ZSM-5 for Methanol and Low-Carbon Hydrocarbon Coupling Aromatization

Sodium Promoted FeZn@SiO2-C Catalysts for Sustainable Production of Low Olefins by CO2 Hydrogenation

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Partial Oxidation of Ethane to Oxygenates Using Fe- and Cu-Containing ZSM-5

Combination of Cu/ZnO Methanol Synthesis Catalysts and ZSM-5 Zeolites to Produce Oxygenates from CO2 and H2

Boosting CO2 Hydrogenation to Light Olefins with Low CO Selectivity Through Promoting HCOO* Intermediates on Fe-ZnGa2O4/SAPO-34

Methanol Promoted Naphtha Catalytic Pyrolysis to Light Olefins on Zn-modified High-Silicon HZSM-5 Zeolite Catalysts

High‐Efficiency and Long‐life Synergetic Dual‐Oxide/Zeolite Catalyst for Direct Conversion of Syngas into Aromatics

Long-chain Α-Olefins Production over Co-MnOx Catalyst with Optimized Interface

Effects of Silicalite-1 Coating on the p-Xylene Selectivity and Catalytic Stability of HZSM-5 in Toluene Methylation with Methanol

Fe2O3@ZrO2 Catalyst Derived from MOF-on-MOF for Direct CO2 Hydrogenation to Light Olefins

Efficient Synthesis of Monomeric Fe Species in Zeolite ZSM‐5 for the Low‐Temperature Oxidation of Methane

Direct Conversion of Syngas to Gasoline Ranged Olefins over Na Impellent Fe@NaZSM-5 Catalyst

ZnZrOx integrated with chain-like nanocrystal HZSM-5 as efficient catalysts for aromatics synthesis from CO2 hydrogenation

Increasing para -Xylene Selectivity in Making Aromatics from Methanol with a Surface-Modified Zn/P/ZSM-5 Catalyst

Highly Active Cu-CeZrOx/ZSM-5@Si Catalyst for Direct Conversion of Syngas to Aromatics

Synthesis of hierarchical Fe-incorporated ZSM-5 molecular sieves with an Fe-based metal-organic framework as a mesoporogen and iron source for catalytic pyrolysis of alkanes

Designing a Bifunctional Zrcuox/Hzsm-5 Catalyst for Selective Methylation of Toluene with Carbon Dioxide to Para-Xylene