Abstract:In this study, 9LiFePO4·Li3V2(PO4)3/C (LFVP-91/C) composite cathode materials (molar ratio of LiFePO4:Li3V2(PO4)3 = 9:1) were prepared using a sol–gel (SG) technique and spray drying (SP) technique, followed by a calcination process at 650–750 °C for 10 h. Oxalic acid and citric acid were used as chelating agents, l-ascorbic acid (AA) was used as a reducing agent, and sucrose (SUC) was used as a carbon source. For improving the electrochemical properties of LFVP-91/C, different conductive carbon materials were used as carbon additives, including graphene oxide (GO), graphene nanosheet (GNS), and carbon nanotube (CNT). The experimental results show that the best discharge capacities of as-prepared SG-LFVP-91/C are approximately 151.1 mAh/g at 0.1C/0.1C, 115.2 mAh/g at 0.2C/5C, and 98.2 mAh/g at 0.2C/10C. The capacity retention after 100 cycles at 1C/1C is 84.0%. After addition of GO, the best discharge capacity retention increases to 91.66% after 100 cycles at 1C/1C. Moreover, after addition of GNS + CNT, the discharge capacity of SP-LFVP-91/C/GNS + CNT composite material increases to 160.1 mAh/g at 0.1C/0.1C, 129.3 mAh/g at 0.2C/5C, and 117.8 mAh/g at 0.2C/10C. No capacity fading is observed after 30 cycles at 0.1C/0.1C. The capacity retentions after 100 cycles and 500 cycles at 1C/1C increase to 97.58% and 85.26%, respectively. This study demonstrates that the prepared SP-LFVP-91/C/GNS + CNT composite cathode materials are excellent candidates for use in lithium-ion power batteries for electric vehicles.

Preparation and Characterization of LiFePO 4 ·xli 3 V 2 (PO 4 ) 3 Composites by Two-Step Solid-State Reaction Method for Lithium-Ion Batteries

Preparation of Li3V2 (po4)3/lifepo4 Composite Cathode Material for Lithium Ion Batteries

Improved Electrochemical Performances of 9lifepo4·li3v2(po4)/c Composite Prepared by a Simple Solid-State Method

Material Optimization Engineering toward xLiFePO4·yLi3V2(PO4)3 Composites in Application-Oriented Li-Ion Batteries

Electrochemical Performance of LiFe1−xVxPO4/carbon Composites Prepared by Solid-State Reaction

Preparation of LiFePO4/Li3V2(PO4)3/C composite cathode materials and their electrochemical performance analysis

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Preparation of LiFePO_4 and Its Structure Change and Performance Study in the Charge-discharge Cycles

Improved Electrochemical Performances of LiFePO4·Li3V2(PO4)/C Composite Cathode Materials Prepared by Two Simple Solid-State Methods

Structural and electrochemical characterization of 0.7LiFePO 4·0.3Li3V2(PO4) 3/C cathode materials using PEG and glucose as carbon sources

Synthesis and Electrochemical Performance of Xlifepo4·yli3v2（po4）3 Composites

Synthesis and Characterization of 0.95limn 0.95 Fe 0.05 PO 4 ·0.05li 3 V 2 (PO 4 ) 3 Nanocomposite by Sol–gel Method

Influence of Coexisting Li3PO4 on Electrochemical Properties of LiFePO4

Characteristics of xLiFePO 4 ·y Li 3 V 2 (PO 4 ) 3 electrodes for lithium batteries

Synthesis of LiFePO4/C Composite As a Cathode Material for Lithium-Ion Battery by a Novel Two-Step Method

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Composites of LiMnPO4 with Li3V2(PO4)3 for Cathode in Lithium-Ion Battery

Preparation and Electrochemical Performance of 2life1–xcoxpo4–li3v2(po4)3/c Cathode Material for Lithium-Ion Batteries

Extra Li-ion storage of LiFePO4/C composite materials synthesized with Fe1.5P

Preparation and Electrochemical Performance of LiFePO_4/C Using Fe_2O_3 As Raw Material

The Effect of Different Amounts of Conductive Carbon Material on the Electrochemical Performance of the LiFePO4 Cathode in Li-Ion Batteries