Abstract:A series of zirconia-supported copper oxide catalysts synthesized by decomposition of the oxalate precursors formed by oxalate gel-coprecipitation in alcoholic solution were extensively investigated in relation to their performance in methanol steam reforming. The combination of different techniques (N-2 adsorption, X-ray diffraction (XRD), N2O titration, H-2-TPR, diffuse reflectance Fourier transform infrared, Raman, and X-ray photoelectron spectroscopy) in the characterization of Cu/ZrO2 catalysts shows that the surface and structural characteristics of the zirconia phase as well as the dispersion and nature of the copper species depend strongly on the calcination temperature. Temperature-programmed reduction patterns reveal the presence of three types of copper species on the ZrO2 support. XRD results indicate that, depending on the calcination temperature, a substantial incorporation of Cu species into the zirconia lattice leading to a strong Cu-ZrO2 metal-support interaction may occur. The N2O titration reveals that the 550 degrees C calcined material exhibits the highest metallic copper surface area as compared to other samples, as opposed to in situ XRD analysis showing that the lower the calcination temperature the higher the copper dispersion. Spectroscopic measurements reveal that the phase transformation of zirconia from tetragonal to monoclinic takes place initially at the surface regions of the Cu-ZrO2 sample, as evidenced from the fact that the monoclinic phase can be detected first by Raman spectroscopies for the samples calcined at a lower temperature than by XRD. The highest activity was achieved for the 550 degrees C calcined material, illustrating that the creation of monoclinic phase enriched on the surface of tetragonal zirconia in Cu/ZrO2 are beneficial for the generation of copper catalyst with enhanced activities.

The Effect of the Preparation Methods on the Structure of Wo3/Zro7

Structure Characterization Of Wo3/Zro2 Catalysts By Raman Spectroscopy

Structure Characterization of W03/Zr02 Catalysts by Raman Spectroscopy

Effect of Ce/Zr Atomic Ratio on the TWC Properties of PdO/CexZr1-xO2(x=0-1.0) Catalysts

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

Influence of WO3 Monolayer Modification on the Properties of Ce Zr1−O2-supporting CuO Catalysts

EFFECTS OF CRYSTALLIZATION OF ZIRCONIUM HYDROXIDE ON THE ISOMERIZATION PERFORMANCES OF Pt/WO_3-ZrO_2

The effect of preparation conditions on the structure and catalytic properties of VPO catalysts: I. Preparation and structure of catalysts

The effect of preparation conditions on the structure and catalytic properties of VPO catalysts (1). Preparation and structure of catalysts

Effect of Preparation Method on the Surface and Redox Properties of Ce0.67zr0.33o2 Mixed Oxides

Effect Of Preparation Method On Catalytic Performance Of Cuo-Ceo2/Zro2 For Co Oxidation

Studies of the Structures and TPR Properties of Co/ZrO2 Catalyst

Effect of Preparation Method on Surface Area and Crystalline Form of Ceo2-Zro2 Solid Solution

WO3 Microcrystallites: One of the Crucial Factors Controlling the Isomerization Activity of Pt/WO3–ZrO2

THE SUPPORT EFFECT AND SURFACE ACIDITY OF THE SUPPORTED TUNGSTEN OXIDE CATALYSTS BY USING ZIRCONIUM HYDROXIDE AND OXIDE SUPPORTS

Effect Of Zro2 On Support Structure And Surface Oxygen Property Of Pd/Al2o3

Effect of crystallization mode of hydrous zirconia support on the isomerization activity of Pt/WO3–ZrO2

Effect of the Tungsten Precursor on the High Activity of the WO3/ZrO2 Catalyst in the Oxidative Lactonization of 1,2-Benzenedimethanol

Structural Evolution and Catalytic Properties of Nanostructured Cu/Zro2 Catalysts Prepared by Oxalate Gel-Coprecipitation Technique

Preparation and Characterization of Crox/Zro2 with High Thermal Stability and High Specific Surface Area

Influences of preparation methods of ZrO2 support and treatment conditions of Cu/ZrO2 catalysts on synthesis of methanol via CO hydrogenation