Abstract:Water-side oxidative corrosion of zirconium alloy is a key problem in the design of nuclear fuel rods cladding materials in pressurised water reactors(PWRs),and its corrosion resistance is one of the main factors limiting service life.At present,Zr-Sn-Nb system alloys are still the main development direction of advanced zirconium alloys.Sn and Nb can exhibit a variety of valence states in the oxide film of the cladding and significantly affect the stability of ZrO2.However,the influence mechanism of Sn and Nb on the fraction of t-ZrO2 and the t-m phase transition is unclear.In this work,the lattice properties,formation enthalpies,and oxygen vacancy formation energy of ZrO2 under the doping conditions of Sn and Nb with different valence states are calculated based on the first-principles,and the influence mechanism of Sn and Nb on the stability of ZrO2 is revealed at an atomic scale.The results show that there is a significant difference between the effects of Sn and Nb,as well as between low-valent and high-valent elements.Sn2+and Nb3+cause lattice swelling to be significantly distorted,Nb5+causes lattice to shrink,which contributes to reducing the stresses within the film,and Sn4+leads the lattice to slightly swell.The low-valent elements all make ZrO2 less stable and are unfavourable for the stability of t-ZrO2 relative to m-ZrO2.The high-valent Nb5+and Sn4+promote the relative stability of t-ZrO2,thus inhibiting the t-m phase transition,with Nb5+having a significant effect and Sn4+having a weak effect.The relative stability of t-ZrO2 increases with pressure rising in a range of 0-3.5 GPa.Compared with high-valent elements,the low-valent elements are favourable for introduing oxygen vacancies into t-ZrO2,thus stabilising the interfacial t-ZrO2 and enhancing the corrosion resistance of the cladding.By investigating the electronic structure,it is found that the oxygen vacancy formation energy is positively correlated with the magnitude of charge transfer(or degree of electron localisation)between the alloying element ion and the oxygen vacancy.These results contribute to optimizing the composition and designing the structure for corrosion resistance of zirconium alloys.

Reassessment of Oxidation-Induced Amorphization and Dissolution of Nb Precipitates in Zr−Nb Nuclear Fuel Cladding Tubes

Oxide characteristics of 90Nb-10Zr alloy corroded under different water chemistry conditions

Nb speciation and microstructural characterization of the oxide layer formed on neutron-irradiated Zr-2.5 Nb alloy in high-temperature water

High-temperature Corrosion of Zr–Nb Alloy for Nuclear Structural Materials

Corrosion Behavior of Second Phase Alloys of Beta-(Nb, Zr) in Deionized Water at 360 Degrees C

Early-stage Diffusion and Oxidation Behavior of Cr-Nb Coated Zr Alloy Accident Tolerant Fuel Cladding Materials at 1200°C - 1500°C

Effects of Molybdenum on Microstructural Evolution and Mechanical Properties in Zr–Nb Alloys As Nuclear Fuel Cladding Materials

Changing Mechanisms of High-Temperature Oxidation of Zr-1%Nb Alloy in Air and Steam by Surface Modification with Charged Particles

Long-Term Oxidation of Zirconium Alloy in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling

Corrosion of Zr-xTi-yNb Alloys in Concentrated Nitric Acid at Elevated Temperature

Effects of Mo and Zr Composite Additions on the Microstructure, Mechanical Properties and Oxidation Resistance of Multi-Elemental Nb-Si Based Ultrahigh Temperature Alloys

First-principles Study on Effects of Alloying Elements Sn and Nb on Phase Stability of Corrosion Oxide Films of Zirconium Alloys

Oxidation of Typical Zr-1nb Alloy in High-Temperature Air under 700–900 °C

High-temperature oxidation of Zr 1Nb zirconium alloy with protective Cr/Mo coating

Uniform Corrosion behavior of Zr-1Sn-0.35Fe-0.15Cr- x Nb alloys in 400 °C super-heated steam with oxygen

Effects of Nb-doping on the Mechanical Properties and High-Temperature Steam Oxidation of Annealing FeCrAl Fuel Cladding Alloys

Enhancing the oxidation behaviors of Zr alloys for nuclear fuel cladding using nanolamellar Cr/CrN coating

Microstructure of Zr-Sn-Nb Alloy After 1000 similar to 1250 degrees C Steam Oxidation

Addition of niobium in Fe-13Cr-4.5Al-2Mo alloy used as ATF cladding: Effect on high temperature water corrosion and in-situ electrochemistry

Corrosion Degradation Mechanism of Cr-Coated Zr-4 Alloy under Simulated Nuclear Conditions for Accident-Tolerant Fuel

On the Interactions Between Alloying Element Niobium and Interstitial/vacancy in Zr-Nb Alloy: A First-Principles Study